Characterization of a bonding method for titanium-glass sealing
نویسندگان
چکیده
منابع مشابه
A Novel Technique for the Connection of Ceramic and Titanium Implant Components Using Glass Solder Bonding
Both titanium and ceramic materials provide specific advantages in dental implant technology. However, some problems, like hypersensitivity reactions, corrosion and mechanical failure, have been reported. Therefore, the combining of both materials to take advantage of their pros, while eliminating their respective cons, would be desirable. Hence, we introduced a new technique to bond titanium a...
متن کاملFabrication and characterization of 20 nm planar nanofluidic channels by glass-glass and glass-silicon bonding.
We have characterized glass-glass and glass-Si bonding processes for the fabrication of wide, shallow nanofluidic channels with depths down to the nanometer scale. Nanochannels on glass or Si substrate are formed by reactive ion etching or a wet etching process, and are sealed with another flat substrate either by glass-glass fusion bonding (550 degrees C) or an anodic bonding process. We demon...
متن کاملBonding to titanium.
The recent synthesis of a crystalline compound containing Ti bonded to cyclopentadienyl and a substituted dienyl fragment prompted the question of whether Ti-C contacts that were found to be shorter than other such bonded contacts in the same molecule should be considered as short nonbonded contacts or "nonclassical metal-to-saturated-carbon atom interactions", fitting the description of agosti...
متن کاملThe potential for bonding titanium restorations.
PURPOSE The use of titanium for implants has shown the biological acceptance of the metal. Recently, methods of using titanium for restorations, crowns, and bridges have been introduced using both cast and spark erosion systems for fabrication. A potential also exists for using titanium for bonded (Maryland) bridges. MATERIALS AND METHODS In this study, the potential for bonding titanium was ...
متن کاملSacrificial adhesive bonding: a powerful method for fabrication of glass microchips
A new protocol for fabrication of glass microchips is addressed in this research paper. Initially, the method involves the use of an uncured SU-8 intermediate to seal two glass slides irreversibly as in conventional adhesive bonding-based approaches. Subsequently, an additional step removes the adhesive layer from the channels. This step relies on a selective development to remove the SU-8 only...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: SN Applied Sciences
سال: 2020
ISSN: 2523-3963,2523-3971
DOI: 10.1007/s42452-020-03871-z