Characterization of Al-Cu alloy reinforced fly ash metal matrix composites by squeeze casting method
نویسندگان
چکیده
منابع مشابه
Casting of SiC Reinforced Metal Matrix Composites
Composites based on two aluminium alloys (A536 and 6061) reinforced with 10% or 20% volume fraction of SiC particles were produced by gravity casting and a novel two-step mixing method was applied successfully to improve the wettability and distribution of the particles. The SiC particles were observed to be located predominantly in the interdendrit ic regions, and a thermal lag model is propos...
متن کاملPreparation and Characterization of B 4 C Particulate Reinforced Al - Mg Alloy Matrix Composites
This paper describes the fabrication and mechanical testing of Al-Mg-boron carbide particulate composites using stir casting technique. The size of the boron carbide particulates is ranging between 30 to 100 μm. The boron carbide contents are varied from 3 and 7% by weight and are dispersed in the alloy matrix. The mechanical properties of the castings, particularly their tensile properties and...
متن کاملMechanical and Tribological Behavior of Aluminum Alloy LM13 Reinforced with Titanium Dioxide Metal Matrix Composites
In the present research work physical, mechanical and tribological behavior of Aluminum (Al) alloy LM13 reinforced with Nano-sized Titanium Dioxide (TiO2) particulates were fabricated, mechanical and tribological properties were investigated. The amount of nano TiO2 particulates in the composite was added from 0.5% to 2% in 0.5 weight percent (wt %) increments. The Al-LM13-TiO2 Metal Matrix Com...
متن کاملA TRANSIENT TWO-DIMENTIONAL INVERSE ESTIMATION OF THE METAL-MOLD HEAT TRANSFER COEFFICIENT DURING SQUEEZE CASTING of AL-4.5WT%CU
In this paper, a transient, two-dimensional and nonlinear inverse heat conduction problem in solidification process is considered. Genetic algorithm is applied for the identification of the interfacial heat transfer coefficients during squeeze casting of commercial aluminum alloy (Al-4.5wt%Cu) by assuming a priori information regarding the functional form of the unknown heat transfer coefficien...
متن کاملDry Sliding Wear and Mechanical Behavior of Aluminium / Fly ash / Graphite Hybrid Metal Matrix Composite Using Taguchi Method
The experimental investigation of hybrid metal matrix composites with fly ash and graphite reinforced aluminium alloy (Al 6061) composites samples, processed by stir casting route are reported. The aluminium alloy was reinforced with 3 wt.%, 6 wt.%, 9 wt.% fly ash and fixed 3 wt.% of graphite to mixture the hybrid composite. Hardness of the hybrid composite were tested it was found that when th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Engineering, Science and Technology
سال: 2018
ISSN: 2141-2839,2141-2820
DOI: 10.4314/ijest.v5i4.7