Characterization of Anode Substrates and Supported Electrolyte Thin Films for Intermediate Temperature Solid Oxide Fuel Cells
نویسندگان
چکیده
منابع مشابه
Anode-Supported Solid Oxide Fuel Cells with Thin Film Electrolyte for Operation at Reduced Temperatures
In order to reduce the operating temperature of solid oxide fuel cells (SOFCs), anodesupported cells incorporating thin film (~10 μm) electrolytes in conjunction with anode/electrolyte and cathode/electrolyte interlayers were studied. Anode supported button cells were prepared through a conventional approach and were analyzed via Scanning Electron Microscopy (SEM), Polarization, and Electrochem...
متن کاملLa0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study
In this study the characteristics of two different kinds of La0.6Sr0.4Co0.2Fe0.8O3 (LSCF) powders, one in-house synthesized powder by a co-precipitation method and another one purchased from Fuel Cell Materials Co. (FCM Co., USA), were compared. The co-precipitated powder was prepared by using ammonium carbonate as precipitant with a NH4+/NO3- molar ratio of 2 and calcination at 1000C for 1 h....
متن کاملInk-jet Printing of Electrolyte and Anode Functional Layer for Solid Oxide Fuel Cells (postprint)
In thiswork, solid oxide fu to study the resulting mi revealed a highly conform anode-interlayer. Open ci 0.175Wcm−2 was achieve used to fabricate stable S ceramics processing meth impact on cell performanc
متن کاملla0.6sr0.4co0.2fe0.8o3 perovskite cathode for intermediate temperature solid oxide fuel cells: a comparative study
in this study the characteristics of two different kinds of la0.6sr0.4co0.2fe0.8o3 (lscf) powders, one in-house synthesized powder by a co-precipitation method and another one purchased from fuel cell materials co. (fcm co., usa), were compared. the co-precipitated powder was prepared by using ammonium carbonate as precipitant with a nh4+/no3- molar ratio of 2 and calcination at 1000c for 1 h....
متن کاملThree-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell
In this article three dimensional modeling of a planar solid oxide fuel cell (SOFC) was investigated. The main objective was to attain the optimized cell operation. SOFC operation simulation involves a large number of parameters, complicated equations, (mostly partial differential equations), and a sophisticated simulation technique; hence, a finite element method (FEM) multiphysics approach ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ECS Proceedings Volumes
سال: 2001
ISSN: 0161-6374,2576-1579
DOI: 10.1149/200116.0973pv