Characterization of pack cemented Ni2Al3 coating exposed to KCl(s) induced corrosion at 600 °C
نویسندگان
چکیده
منابع مشابه
Composition Distribution and Electrochemical Behavior of an Ni2Al3 Coating on Q235 Steel
An Ni2Al3 coating was prepared via the electrodeposition of nickel followed by pack aluminization. Polarization curve and electrochemical impedance spectroscopy were performed to study the room temperature corrosion behavior of the coating in a 3.5 wt. % NaCl solution. The long-term impedance of the coating was also investigated after immersion for 30 days. Results show that the Ni2Al3 coating ...
متن کاملHot Corrosion Behavior of Sputtered Nanocrystalline Coating with Yttrium Addition at 900 °C
The high temperature corrosion behavior of sputtered nanocrystalline K38 coating with and without yttrium addition under mixed molten salt film in air was investigated. Accelerated corrosion occurred on the coating without yttrium (Y) addition locally after 60 h exposure at 900 °C, which resulted in negative weight gain in kinetics. A uniform and protective alumina scale formed on surface of th...
متن کاملGraphene: corrosion-inhibiting coating.
We report the use of atomically thin layers of graphene as a protective coating that inhibits corrosion of underlying metals. Here, we employ electrochemical methods to study the corrosion inhibition of copper and nickel by either growing graphene on these metals, or by mechanically transferring multilayer graphene onto them. Cyclic voltammetry measurements reveal that the graphene coating effe...
متن کاملCorrosion of cemented titanium femoral stems.
Cemented titanium stems in hip arthroplasty are associated with proximal cement-stem ebonding and early failure. This was well publicised with the 3M Capital hip. However, corrosion in this setting has been reported with only one stem design and is less widely accepted. We present a series of 12 cemented titanium Furlong Straight Stems which required revision at a mean of 78 months for thigh pa...
متن کاملAntireflection coating for high index cemented doublets.
Uncoated surfaces of high index glasses when cemented to form lens doublets have inferior antireflection properties to doublets of low index glass. This can be overcome by the application of a single layer coating of aluminum oxide prior to cementing.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials at High Temperatures
سال: 2017
ISSN: 0960-3409,1878-6413
DOI: 10.1080/09603409.2017.1392112