Characterization of the optical gain in doped polymer optical fibres
نویسندگان
چکیده
منابع مشابه
Optical Characterization of Doped Thermoplastic and Thermosetting Polymer-Optical-Fibers
The emission properties of a graded-index thermoplastic polymer optical fiber and a step-index thermosetting one, both doped with rhodamine 6G, have been studied. The work includes a detailed analysis of the amplified spontaneous emission together with a study of the optical gains and losses of the fibers. The photostability of the emission of both types of fibers has also been investigated. Co...
متن کاملcontrol of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولPhotosensitivity in tin-doped silica optical fibres
Permanent gratings (refractive index modulation ~3x10 ) were written in tin-doped silica -4 optical fibres with low levels of SnO (~0.15 mol %). In Ge-doped silica, ~10 mol% GeO is 2 2 required to produce comparable photorefractivity under similar conditions. Photosensitivity in tin-doped silica optical fibres G. Brambilla, V. Pruneri, L. Reekie Optoelectronics Research Centre, Southampton Univ...
متن کاملCleaving of microstructured polymer optical fibres
The issue of how best to cleave PMMAmicrostructured polymer optical fibres (mPOF) is addressed. The impact of the following parameters on the cleaving process is considered: (i) temperature of the cutting blade, (ii) temperature of the platen holding the fibre, (iii) time allowed for thermal equilibration between fibre and platen, (iv) blade speed, and (v) blade condition. The strong influence ...
متن کاملSolution doping of microstructured polymer optical fibres.
Solution doping of microstructured polymer optical fibres [mPOF] is demonstrated, a technique which allows dopants to be introduced after polymerisation through the microstructure. Controlled diffusion is used to disperse the dopant uniformly across the fibre core, and the final concentration can be systematically varied by appropriate choice of conditions. We use this technique to produce a fi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Luminescence
سال: 2016
ISSN: 0022-2313
DOI: 10.1016/j.jlumin.2016.04.009