Charge State Dependent Energy Deposition by Ion Impact
نویسندگان
چکیده
منابع مشابه
Charge state dependent energy deposition by ion impact.
We report on a measurement of craters in thin dielectric films formed by Xe(Q+) (26 ≤ Q ≤ 44) projectiles. Tunnel junction devices with ion-irradiated barriers were used to amplify the effect of charge-dependent cratering through the exponential dependence of tunneling conductance on barrier thickness. Electrical conductance of a crater σ(c)(Q) increased by 4 orders of magnitude (7.9 × 10(-4) μ...
متن کاملLow Energy Ion Assisted Vapor Deposition
The performance of multilayered thin film materials often depends sensitively upon the (physical) roughness and degree of (chemical) mixing at interfaces. Irradiation of a growth surface with an assisting ion beam is often used to modify surface roughness. Molecular dynamics has been used to explore the use of low energy (less than 20 eV) Xe+ and Ar+ assisted deposition of model Ni/Cu/Ni multil...
متن کاملCharge State Boosters for Radioactive Ion Acceleration
For the post acceleration of radioactive ions produced at ISOL facilities the increase of the charge state is essential to fulfill the A/q requirements of the accelerators. Many of those existing or proposed facilities are relying on the performance of charge state boosters of EBIS or ECRIS type. Although, in principle both types of sources can be used in pulsed or continuous mode operation an ...
متن کاملLaser Ablation Ion Source for Highly Charge-state Ion Beams*
The KEK Laser ablation ion source (KEK-LAIS) is under development in order to generate highly ionized metal and fully ionized carbon for future applications. Laser ablation experiments have been carried out by using NdYAG laser (0.75 J/pulse, 20 ns) at the KEK test bench. Basic parameters such as a charge-state spectrum and momentum spectrum of the plasma and extracted ion beam current have bee...
متن کاملMicrowave Ion Source for Low Charge State Ion Production
The Plasma and Ion Source Technology Group at LBNL have developed a microwave ion source. The source consists of a stainless-steel plasma chamber, a permanent-magnet dipole structure and a coaxial microwave feed. Measurements were carried out to characterize the plasma and the ion beam produced in the ion source. These measurements included current density, charge state distribution, gas effici...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physical Review Letters
سال: 2011
ISSN: 0031-9007,1079-7114
DOI: 10.1103/physrevlett.107.063202