Charpy impact toughness of conventional and advanced composite laminates for aircraft construction
نویسندگان
چکیده
منابع مشابه
A NOVEL PROCEDURE FOR MEASURING THE IMPACT FRACTURE TOUGHNESS KId WITH PRECRACKED CHARPY SPECIMENS
A procedure i s presented f o r determining the impact f r a c t u r e toughness K w i t h precracked Charpy specimens wi thout performing any load measurements.'?he Kid-val ue i s obtained from preestabl ished impact response curves and a measurement o f t h e t ime-to-fracture. The measuring technique i s f u l l y dynamic and does not impose any r e s t r i c t i o n s on t h e t e s t condi...
متن کاملImpact Toughness Modification of NIST Low-Energy Charpy Verification Specimens for Testing at Room Temperature
The possibility for the National Institute for Standards and Technology (NIST) to certify Charpy reference specimens for testing at room temperature (21 °C ± 1 °C) instead of −40 °C was investigated in a previous study, in which a slightly increased likelihood of specimen jamming was observed at the low-energy level (13 J to 20 J). Moreover, there is a concern that the higher impact toughness o...
متن کاملFace-on and Edge-on Impact Response of Composite Laminates
This paper presents comprehensive experimental and numerical studies on the face-on and edge-on impact behavior of composite laminates. Experimental work is focused on finding the impact energy limits for barely visible impact damage (BVID) when a laminated composite plate is impacted either on its face or an edge. High-fidelity finite element analysis (FEA) model utilizing Enhanced Schapery th...
متن کاملUltrahigh Charpy impact toughness (~450J) achieved in high strength ferrite/martensite laminated steels
Strength and toughness are a couple of paradox as similar as strength-ductility trade-off in homogenous materials, body-centered-cubic steels in particular. Here we report a simple way to get ultrahigh toughness without sacrificing strength. By simple alloying design and hot rolling the 5Mn3Al steels in ferrite/austenite dual phase temperature region, we obtain a series of ferrite/martensite la...
متن کاملDesign and Analysis of a Compact Tension (ct) Specimen for Intralaminar Fracture Toughness Characterisation of Woven Composite Laminates
Final failure of laminated composite structures is preceded by different damage mechanisms involving fracture initiation and propagation. Fracture in a composite laminate can appear either between two plies or within a lamina. In the first case, interlaminar fracture or delamination, the crack causes separation of two adjacent plies and will mainly involve matrix failure or matrix-to-fibre debo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2009
ISSN: 1516-1439
DOI: 10.1590/s1516-14392009000400004