Chemically deposited In2S3–Ag2S layers to obtain AgInS2 thin films by thermal annealing
نویسندگان
چکیده
منابع مشابه
The effects of thermal annealing on the obliquely deposited Ag–Ge–S thin films
Obliquely deposited thin films of ternary Ag–Ge–S glasses are characterized in this work. Thin films are fabricated in a vacuum thermal evaporator at different evaporation angles and examined by Raman spectroscopy. The Raman mode frequency of GeS4 corner-sharing (CS) structure of the as-deposited films display a red-shift as a function of Ag content due to reduced global connectivity, and there...
متن کاملStudy of Composition and Optical Properties of Chemically Deposited Pd-xSb2S3 Thin Films
The study reports on the effects of different concentration of palladium impurities on the compositional and optical properties of Palladium Doped Antimony Sulphide (Pd-xSb2S3) thin films grown by the chemical bath deposition method. The films were grown at room temperature and other deposition conditions such as the bath temperature, pH, complexing agents were kept constant. The concentration ...
متن کاملThe impact of thickness and thermal annealing on refractive index for aluminum oxide thin films deposited by atomic layer deposition
The aluminum oxide (Al2O3) thin films with various thicknesses under 50 nm were deposited by atomic layer deposition (ALD) on silicon substrate. The surface topography investigated by atomic force microscopy (AFM) revealed that the samples were smooth and crack-free. The ellipsometric spectra of Al2O3 thin films were measured and analyzed before and after annealing in nitrogen condition in the ...
متن کاملTi/Si thin films during ultra rapid thermal annealing
WC introduce a new technique for rapidly heating (10’ “C/s) thin films using an electrical thermal annealing (ETA) pulse technique. By applying a high-current dc electrical pulse to a conductive substrate-heater material (Si), joule heating occurs thus heating the thin film. This method was demonstrated by heating thin films of aluminum at rates ranging from lo3 to lo6 “C/s. The temperature of ...
متن کاملStructural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films
Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Surface Science
سال: 2012
ISSN: 0169-4332
DOI: 10.1016/j.apsusc.2012.09.077