Class II (laminar flow) biological safety cabinet.

Modified laminar flow biological safety cabinet.

Tests are reported on a modified laminar flow biological safety cabinet in which the return air plenum that conducts air from the work area to the high efficiency particulate air filters is under negative pressure. Freon gas released inside the cabinet could not be detected outside by a freon gas detection method capable of detecting 10(-6) cc/s. When T3 bacteriophage was aerosolized 5 cm outsi...

Ergonomic considerations in the development of a class II, type A/B3 biological safety cabinet.

A test system for the biological safety cabinet.

A simple, cheap and readily available test system for biological safety cabinets is described. It depends on the containment of an aerosol of Bacillus subtilis spores generated in a BIRD micronebulizer and the measurement of air flows with an anemometer. The system was set up to survey new equipment but equally valuable results have been obtained from tests during use. New units were often badl...

Evaluation of laminar flow microbiological safety cabinets.

The microbiological control efficiency of two class 100 laminar down-flow hoods was determined by using aerosols of Bacillus subtilis var. niger spores. The first unit challenged utilized a slanted eyelid to partially enclose the front work opening. This hood showed nearly perfect control of ambient organisms in the work area. It also gave a 10(6) or greater drop in the number of organisms pass...

Effects of airflow rates and operator activity on containment of bacterial aerosols in a class II safety cabinet.

Biological safety cabinets are frequently relied upon to provide sterile work environments in which hazardous microorganisms can be safely handled. Verification of correct airstream velocities does not, by itself, ensure that adequate protection will be achieved under all users. Instead, the concentration of microorganisms in a cabinet operator's breathing zone must be measured during typical c...