Closed-loop laser polishing using in-process surface finish metrology
نویسندگان
چکیده
منابع مشابه
Surface Quality Finish in Laser Cutting Using Taguchi Design
Original scientific paper The present work aims at obtaining parametric combination to achieve the best surface finish and assess effects of selected process parameters on a laser cut quality for laser cutting. This helps to study the variation in response parameter (Ra value) for various levels of selected process parameters. In the present work mild steel specimen is used and the effect of th...
متن کاملProcess Identification Using Open-loop and Closed-loop Step Responses
This paper is concerned with process identification by curve fitting step responses. Both open-loop and closed-loop identification are studied using simulated data for typical examples as well as experimental data from a laboratory plate heat exchanger. Timedomain curve fitting utilizing efficient local optimization techniques is employed to find the parameters of the process model. Process mod...
متن کاملModeling and Optimization of Laser Polishing Process
Laser polishing is a finishing process based on melting material, with the objective of improving surface topography. Some operating parameters must be taken into consideration, such as laser power, feed rate, offset, and overlapping. Moreover, because of its dependence on the primary process, the initial topography has also an impact on the final result. This study describes a quadratic model,...
متن کاملDistance protection closed-loop testing using RTDS
This paper presents a distance protection test procedure by applying the Real-Time Digital Simulator (RTDS) of a power system. RTDS is a tool to design, develop, and test power-system protection. The RTDS enables real-time computation of electromagnetic phenomena with a calculation time step of even 50μs. The hardware allows the import and export of many signals from the simulator to an ext...
متن کاملClosed Loop Light Beam Micromanipulators for Optical Metrology
The use of light beam micromanipulators in space subsystems has received particular attention in recent years. To compensate for changes in system parameters during the flight, these devices require closed loop control. This paper reports on an integrated feedback mechanism devised for flexural tortional devices. It consists in using monolithically embedded photodetectors to measure the portion...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Optics
سال: 2018
ISSN: 1559-128X,2155-3165
DOI: 10.1364/ao.57.000834