Closure Measurement of short Fatigue Crack by Surface Wave Technique of Ultrasonic testing.
نویسندگان
چکیده
منابع مشابه
Ultrasonic measurement models for surface wave and plate wave inspections
A complete ultrasonic measurement model for surface and plate wave inspections is obtained, where all the electrical, electromechanical, and acoustic/elastic elements are explicitly described. Reciprocity principles are used to describe the acoustic/elastic elements specifically in terms of an integral of the incident and scattered wave fields over the surface of the flaw. As with the case of b...
متن کاملA Geometric Model for Fatigue Crack Closure Induced by Fracture Surface Roughness
Mechanisms for fatigue crack closure under plane strain conditions have recently been identified at very low (near-threshold) stress intensities in terms of effects of excess corrosion deposits or fracture surface roughness in promoting premature closure of the crack. In the present paper, a geometric model is presented for crack closure induced by fracture surface roughness. This model specifi...
متن کاملCrack Depth Measurement in Concrete Using Surface Wave Transmission
A technique to estimate the depth of surface-breaking cracks in concrete is presented. The surface wave transmission coefficient across the crack plane is determined and used to estimate the depth. A self-compensating testing scheme is applied to eliminate experimental difficulties. Here the self-compensating testing scheme is introduced, and the approach used to estimate crack depth from the m...
متن کاملFatigue of Yttria-Stabilized Zirconia: II, Crack Propagation, Fatigue Striations, and Short-Crack Behavior
Fatigue crack propagation in 3Y-TZP was investigated using controlled surface flaws. A unique growth law strongly dependent on the maximum stress intensity factor and quadratically dependent on the amplitude of the range of stress intensity factor was established. This growth law was found to apply for both surface flaws and internal flaws and could be used to predict fatigue lifetime. The pres...
متن کاملFatigue crack closure: a review of the physical phenomena
Plasticity-induced, roughness-induced and oxide-induced crack closures are reviewed. Special attention is devoted to the physical origin, the consequences for the experimental determination and the prediction of the effective crack driving force for fatigue crack propagation. Plasticity-induced crack closure under plane stress and plane strain conditions require, in principle, a different expla...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 1992
ISSN: 0288-4771
DOI: 10.2207/qjjws.10.302