Co-continuous Structure in Polycarbonate/Amorphous Nylon 3Me6T Blend

Crystalline and Amorphous Orientation of Polypropylene / Nylon 6 Blend Filaments

N6) made with or without PP-g-MAH as compatibilizer are investigated. The blend filaments produced at the take-up speeds of 300 and 800 m/min were drawn with draw ratio of 3.5 and 2, respectively. Effects of blending of N6 with PP on birefringence , crystalline, and amorphous orientation factors of the composite filaments are studied. The amorphous orientation factor, fam of PP was found to inc...

Curvature continuous blend surfaces

We describe a method to generate blend surfaces which t with continuous curvature to the primary surfaces. This blend surface is obtained as the bicubic tensor spline minimizing a variational problem. Among all the bicubic tensor splines which give a curvature continuous blend surface, the one is chosen which minimizes a bilinear functional. In Section 2 we summarize and extend the results of a...

The three-dimensional structure of nylon hydrolase and the mechanism of nylon-6 hydrolysis*

From the Department of Materials Science and Chemistry, Graduate School of Engineering, University of Hyogo, Hyogo 671-2280; Department of Life Science, Graduate School of Life Science, University of Hyogo, Hyogo 678-1297; RIKEN Harima Institute, SPring-8 Center, Hyogo 679-5148; Institute for Protein Research, Osaka University, Osaka 565-0871, Department of Intelligence Mechanical Technology, G...

evolution of co-continuous morphology along the screw length in a co-rotating twin-screw extruder and its effect on impact strength of compatibilized pa6/abs blend

an ultra-glide twin screw extruder is employed to allow the quick and easy removal of the screws from the fixed processing section within few seconds, probing the current degree of the melting state, the dispersive anddistributive processing steps and finally the level of morphology development along extruder screws. for morphological studies the molten samples, collected from different points ...

Nylon