Co-firing of PZT–PMS–PZN/Ag Multilayer Actuator Prepared by Tape-Casting Method
نویسندگان
چکیده
منابع مشابه
Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting
In this study various yttria doped zirconia based thin films were prepared by the aqueous tape casting method. The rheological property of the paste was studies. The phase content and microstructure of the samples was investigated by X-ray diffraction and scanning electron microscope, respectively. The mechanical properties of thin films were studied by Vickers microhardness and nanoindentatio...
متن کاملPreparation of hexaferrite multilayers by tape casting
Tape casting technics were used to realize a screen with continuous change in characteristics. Different hexaferrite compositions owned by the Ba3C02-~Zn~Fe24041 (Z) family were synthetized by coprecipitation method and calcined at 1200 "C in air. Then a slurry containing this powder is slip casted using tape casting. The tapes are dried under magnetic fied in order to orient the magnetic plate...
متن کاملTAPE CASTING OF NON-AQUEOUS HYDROXYAPATITE SLIPS
Thin sheets of hydroxyapatite were fabricated by tape casting process. The non-aqueoustape casting formulation was optimized by adjusting the concentration of organic additivesspecially those of binder and plasticizer in the slurry. The optimized slurry was cast on a glasscarrier using a designed laboratory scale doctor blade. Following a binder removal stage, thetapes were sintered at differen...
متن کاملMagnetic Properties and Structural Study of Ni-Co/Cu Multilayers Prepared by Electrodeposition Method
Ni-Co/Cu multilayers have been grown by electrodeposition method from a single electrolyte (based on Ni(SO4).6H2O, Co(SO4).7H2O, Cu(SO4) and H3BO3) using galvanostatic control on titanium sublayers. The X-ray diffraction (XRD) patterns confirmed the multilayered structure with the nanometer thicknesses. Also, electron diffraction x-ray (EDX) analysis confirmed the purity of deposited samples. ...
متن کاملMultilayer Actuator Composed of PZN–PZT and PZN–PZT/Ag Fabricated by Co-Extrusion Process
A multilayer ceramic actuator composed of piezoelectrically active Pb(Zn1/3Nb2/3)0.2–Pb(Zr0.5Ti0.5)O0.8 (PZN–PZT) layers and electrically conducting PZN–PZT/Ag layers was fabricated by the co-extrusion process. For the piezoelectric layers, PZN–PZT, which is sinterable at a low temperature (9001C), was used. For the conducting layers, a PZN–PZT/Ag composite, made by mixing silver particles with...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Harvesting and Systems
سال: 2015
ISSN: 2329-8774,2329-8766
DOI: 10.1515/ehs-2014-0058