CO2 Capture in Chemically and Thermally Modified Activated Carbons Using Breakthrough Measurements: Experimental and Modeling Study
نویسندگان
چکیده
منابع مشابه
Experimental Investigation and Modeling of CO2 Adsorption Using Modified Activated Carbon
In this research, Activated Carbon (AC) was modified using a sodium hydroxide solution for CO2 adsorption. Adsorption experiments were carried out in a batch reactor at a temperature range of 20-80°C and a pressure range of 2-10 bars to investigate kinetic, isotherm, and thermodynamic of the CO2 adsorption process. Activated carbon was modified with NaOH solution conce...
متن کاملActivated carbons prepared from thermally and chemically treated petroleum and coal tar pitches
Petroleum and coal tar pitches have been treated thermally at 4008C and 4708C, extracted with toluene and subsequently activated with CO at 9008C. With one exception, the development of the micropore widths and volumes in the resulting 2 carbons follows the trend observed for carbons based essentially on precursors of vegetable origin. On the other hand, petroleum pitch treated at 4008C leads t...
متن کاملassessing political stability and instability in central asia and caucasus; case study, azerbaijan and kyrgyzstan
منطقه ی آسیای مرکزی وقفقاز به عنوان منطقه ای تاریخی و به دلیل دارا بودن ذخایر عظیم هیدرو کربنی از اهمیت ویژه ای برخوردار است. کشورهای این منطقه از عوامل عمده ی بی ثباتی نظیر عوامل جغرافیایی، اقتصادی، امنیتی، اجتماعی و سیاسی رنج می برند. پس از فروپاشی اتحاد جماهیر شوروی کشورهای منطقه از نعمت استقلال ناخواسته ای برخوردار شدند که مشکلات فوق را برای آن ها چندین برابر می کرد. در این روند برخی از این...
15 صفحه اولCO2 adsorption by activated templated carbons.
Highly porous carbons have been prepared by the chemical activation of two mesoporous carbons obtained by using hexagonal- (SBA-15) and cubic (KIT-6)-ordered mesostructured silica as hard templates. These materials were investigated as sorbents for CO(2) capture. The activation process was carried out with KOH at different temperatures in the 600-800°C range. Textural characterization of these ...
متن کاملModeling and Experimental Prediction of Wastewater Treatment Efficiency in Oil Refineries Using Activated Sludge Process
In this study, activated sludge process for wastewater treatment in a refinery was investigated. For such purpose, a laboratory scale rig was built. The effect of several parameters such as temperature, residence time, effect of Leca (filling-in percentage of the reactor by Leca) and UV radiation on COD removal efficiency were experimentally examined. Maximum COD removal efficiency was obtained...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Industrial & Engineering Chemistry Research
سال: 2018
ISSN: 0888-5885,1520-5045
DOI: 10.1021/acs.iecr.8b00953