COALESCER BED MODELING TO MIXTURE OIL/WATER: TREATMENT USING ANSYS CFX
نویسندگان
چکیده
منابع مشابه
Liquid–liquid separation using steady-state bed coalescer
This paper presents a literature review on the current understanding of liquid-liquid separation that is immensely widespread in practice, highlighting the steady-state bed coalescer being a good solution in various engineering application. Generally, the fibre bed coalescence has proven to be very effective separation method in the industry. Due to the complexity of bed coalescence phenomenon ...
متن کاملDetermination of required torque to spin aircraft wheel at approach using ANSYS CFX
Many patents have suggested that spinning the aircraft wheel before touchdown would lessen tyre wear as indicated by landing smoke and rubber deposites on the runway caused by skidding wheel at the point of impact. In this paper, the required torque to spin the aircraft wheel at approach speed has been calculated using ANSYS Workbench CFX, which is used to determine the wheel aerodynamic forces...
متن کاملCoolant Mixing Studies of Natural Circulation Flows at the Rocom Test Facility Using Ansys Cfx
Partial depletion of the primary circuit during a postulated small break loss of coolant accident can lead to the interruption of one-phase flow natural circulation. In this case, the decay heat is removed from the core in the reflux-condenser mode. In case of the partial non-availability of the safety injection system, weakly borated condensate can accumulate in particular in the pump loop sea...
متن کاملStudy of Forces and Dynamic Coefficients in Whirling and Eccentric Labyrinth Seals Using ANSYS-CFX
Labyrinth seal force estimates are important to the prediction of the stability of turbomachinery. The force prediction methods fall into several categories: experiments, bulk flow analysis, and finite volume analysis. Finite volume analysis can be split into two subcategories: selfdeveloped and commercial. In this research, a commercial computational fluid dynamics (CFD) program called ANSYSCF...
متن کاملSimulation of Aerodynamic Divergence and Flutter on Wind Turbines using ANSYS-CFX
The recent development of large wind turbines poses new challenges with regard to understanding the mechanisms surrounding unsteady flow-structure interaction. The larger and more flexible blades imply risks from an aeroelastic point of view and urge the need to properly understand and model these phenomena. Due to limited experimental data available in this field, Computational Fluid dynamics ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Brazilian Journal of Petroleum and Gas
سال: 2018
ISSN: 1982-0593
DOI: 10.5419/bjpg2018-0013