Coatings on Stainless Steel by the Sol-Gel Method.
نویسندگان
چکیده
منابع مشابه
Infrared Spectroscopy of Titania Sol-Gel Coatings on 316L Stainless Steel
Sol-gel titania films were deposited on 316L stainless steel using titanium isopropoxide as a chemical precursor. Dipcoating was performed at withdrawal speeds of 6 mm/min, 30 mm/min, and 60 mm/min. Deposited gel films were heat treated in air at 80 ̊C, 100 ̊C, 300 ̊C, and 400 ̊C. The structural evolution of the coatings was evaluated by infrared reflection-absorption spectroscopy. The influence of...
متن کاملContaminant Resistant Sol-Gel Coatings
Valerie Rapson Greece Olympia High School Advisor: Kenneth L. Marshall University of Rochester Laboratory for Laser Energetics Summer High School Research Program 2005 1. Abstract Sol-gel coatings are used on the OMEGA laser optics as anti-reflection (AR) coatings to maximize their transmittance. Over time, trace organic compounds in the laser bay contaminate these sol-gel coatings, reducing th...
متن کاملCrystallization Kinetics of Hydroxyapatite Nano-films on Stainless Steel Through a Sol-Gel Process
This article describes the preparation and analysis of nano hydroxyapatite (HA) films on stainless steel 316L through sol-gel technique. The process started with preparation of a nitrate and phosphate sol. After aging the sol for 24 h at room temperature a SS316 substrate was dip-coated and heat-treated at 350 to 450 °C for different times in air. The coating phase and structure on subs...
متن کاملContamination Resistant Sol-Gel Antireflective Coatings
Silica-based sol-gel antireflective (AR) optical coatings are critical components of high peak power laser systems. Water vapor and volatile organic compounds can contaminate these coatings, reducing both their antireflective efficiency and laser-damage resistance. Previous work has shown that alkylation of free hydroxyl groups on the silica sol-gel with organosilicon compounds in solution can ...
متن کاملAbrasion Resistant Anti-Reflective Sol-Gel Coatings
Many optics in both the OMEGA and OMEGA EP lasers are coated with anti-reflective (AR) silane sol-gel to maximize their transmittance. Although these coatings are highly resistant to both airborne contaminants and laser damage, they are susceptible to mechanical damage by abrasion, and thus require extra care during the handling, installation and alignment of sol-gel optics. Previous “hardened”...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1994
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.45.1230