Cold bulging process for aluminium alloy ring with irregular section
نویسندگان
چکیده
منابع مشابه
Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy
This study examines the fatigue and anisotropy behaviour of cold rolled AA1200 aluminium alloy for light weight automotive connecting rod application. Aluminium (Al) 1200 ingots were melted at temperature of 680 0C (after one hour of heating) cast in sand mould and cast samples homogenized for 6 hrs at 480 0C. The cold rolling process was carried out after homogenisation for 10, 20, 30, 40 and ...
متن کاملDevelopment of Castor Oil – Graphite Lubricants for Cold Extrusion of Aluminium Alloy
The study was conducted to develop castor oil – graphite lubricants for cold extrusion of aluminium alloy and to investigate the effect of the developed lubricant on the extrusion pressure of aluminium alloy. Cold extrusion process at a constant extrusion ratio of 1.25:1 was used on 14mm diameter by 30mm long aluminium alloy billets. Experimental results showed that onset pressure ranges from 1...
متن کاملPositron Lifetime Measurements of Subsurface Region in Aluminium Alloy and Aluminium Alloy Composite after Dry Sliding
This paper presents positron lifetime studies of the subsurface region of AK12 aluminium alloy and Al2O3-particle-reinforced AK12 aluminium alloy composite after sliding against steel in the pin-on-disc machine. The defect depth profile detected in the AK12 alloy extended up to 300 μm but for the composite AK12 the range of this profile was significantly shortened to less than ∼ 90 μm. The posi...
متن کاملOptimization of Process Parameters for Gas Tungsten Arc Welding of AA1100 Aluminium Alloy
This paper aims at optimization of process parameters for gas tungsten arc welding (GTAW) of sheet samples of Aluminium alloy AA1100 using AC wave with Argon as inert gas. Tensile properties of parent and welded specimens were determined as per ASTM-E8M standard. Taguchi approach was applied to determine most influential control parameters which will yield better tensile strength of the joints ...
متن کاملEffects of temperature gradient magnitude on bending angle in laser forming process of aluminium alloy sheets
Laser forming is a thermal forming process which uses laser beam irradiation to produce the desired final forms. In this article, the effect of temperature gradient across Al 6061-T6 aluminum sheets on bending angle is studied. Input parameters including laser power, scan velocity, beam diameter, and sheet thickness are the effective process parameters which influence the temperature gradient....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Manufacturing
سال: 2020
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2020.08.092