Cold Cracking Susceptibility of Joints made of Ferritic-Austenitic Duplex Steel 2205 during Underwater Welding

Laser Beam Welding of Austenitic-Ferritic Transition Joints

Transition joints between austenitic stainless steels and ferritic low alloy steels are extensively utilized in many high-temperature applications in energy conversion systems. Problems related to the use of such dissimilar metal welds (DMWs) have long been recognized, because of premature failures often occurring during service, connected to thermal stresses generated at the weld interface and...

Effect of grain size on solidification cracking susceptibility of type 347 stainless steel during laser welding

Microstructural refining during friction stir processing of SAF 2205 duplex stainless steel

Friction stir processing (FSP) was conducted on a SAF 2205 duplex stainless steel at advancing speed of 50 mm/min and rotational speed of 400 rpm.  Characterization of evolved material was studied using electron microscopy equipped with electron back scattered diffraction (EBSD) system. The results indicated that the severe plastic deformation and the heat generated during the FSP developed a v...

Sensitization Behavior of Gnaw Austenitic Stainless Steel Joints

The present work has been carried out to study the sensitization behavior of AISI 304L austenitic stainless steel weld, fabricated using GTAW (gas tungsten arc welding process). This weld was subjected to post weld thermal aging (PWTA) treatments lying in the sensitization range, viz. 700 ?C for 30 minutes, 500 minutes and 1000 minutes for studying the influence of carbide precipitation on thei...

Strain-Induced Martensite Transformation Simulations during Cold Rolling of AISI 301 Austenitic Stainless Steel

Austenite is a semi-stable phase in most stainless steels that deforms to martensite under Md30 and forms martensitetype ά and ε due to the deformation in the steels. Since the distribution of strain induced martensite plays animportant role in achieving desired properties, the main objective of the present work is to model martensitedistribution of ά during cold rolling using...