Cold-Rolling and Recrystallization Textures of Al-Cu Alloys
نویسندگان
چکیده
منابع مشابه
Recrystallization textures and microstructures of Al-0.3%Cu alloy after deformation to high strains
An Al-0.3%Cu alloy was deformed to high strains by cold rolling. The as-deformed samples were annealed at different temperatures until complete recrystallization. The cold rolling textures were determined by X-ray diffraction while the recrystallization textures and microstructures were characterized by electron backscatter diffraction. It was found that the rolling texture was characterized by...
متن کاملnumerical study of effective parameters on cold rolling of tri-layers al/st/al and cu/al/cu
in this paper, the rolling force and reduction ratio have been investigated in multilayer strip rolling. for this purpose, two different set of multilayers have been selected which are al/st/al and cu/al/cu layouts. at first, the validation of the numerical analysis was performed by using an experimental test. after validation of the numerical results, two set of multilayer layouts were simulat...
متن کاملThe influence of microchemistry on the recrystallization texture of cold-rolled Al-Mn-Fe-Si alloys
The recrystallization textures of a cold-rolled Al-Mn-Fe-Si model alloy with three different microchemistry states after non-isothermal annealing were studied. The microstructure and texture evolution have been characterized by EBSD. It is clearly demonstrated that the actual microchemistry state as determined by the homogenization procedure strongly influence the recrystallized grain size and ...
متن کاملRolling textures of a Cu-20% Nb composite
Heavily rolled in-situ MMCs of Cu-20 vol% Nb have been investigated by means of quantitative texture analysis mainly for three reasons. First, the crystallographic texture can be very sensitive to the deformation process. Second, the orientation distribution affects the strength of the material in terms of the Taylor factor. Third, the influence of a massive second phase on texture development ...
متن کاملElemental separation in nanocrystalline Cu-Al alloys
Y. B. Wang, X. Z. Liao, Y. H. Zhao, J. C. Cooley, Z. Horita, and Y. T. Zhu School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney, Sydney, NSW 2006, Australia School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094, China Division of Materials Science and Technology, Los Alamos National Laboratory, Los Alamos, New ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1965
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.29.5_515