Cold Start Performance of Diesel Engine : 1st Report, Effects of Prereaction on Cold Start
نویسندگان
چکیده
منابع مشابه
Numerical investigation on Effect of thermally isolated piston on improving SI engine performance during the cold start conditions
In low ambient temperatures the engine will have poor output torque and power generation at the first cycles of its performance, long start time and huge noxious emissions because of insufficient temperature and quality of air-fuel mixture and failure of flame to burn the charge. It is noted that any attempt to increase the charge temperature leads to better combustion conditions. By applying t...
متن کاملStudies of DI Diesel Engine Cold Start Combustion in an Optical Engine
A study on ignition and early combustion development has been performed in an optical engine at incylinder thermodynamic conditions representative of those occurring during the cold start of a modern DI Diesel engine for passenger cars at an ambient temperature of -20oC. A general description of the process has been derived from in-cylinder pressure analysis and high speed imaging, and the effe...
متن کاملOptimal Cold-Start Control of a Gasoline Engine
This article analyzes the influence of the ignition retardation on the fuel consumption, the cumulative tailpipe hydrocarbon emissions, and the temperature inside the three-way catalytic converter in a gasoline direct injection engine operated under idling conditions. A dedicated cylinder-individual, model-based, multivariable controller was used in experiments in order to isolate the effect of...
متن کاملCold-Start Collaborative Filtering
Collaborative Filtering (CF) is a technique to generate personalised recommendations for a user from a collection of correlated preferences in the past. In general, the effectiveness of CF greatly depends on the amount of available information about the target user and the target item. The cold-start problem, which describes the difficulty of making recommendations when the users or the items a...
متن کاملCold start modelling of spark ignition engines
The ability of mean value models to replicate the key characteristics of automotive powertrains has been well established over the past four decades. There has been considerable success in the application of these models to controller design, with improved emissions and performance of the primary benefits. However, these low order models typically must make certain assumptions about the engine—...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1961
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.27.1361