COLLAPSE MODE AND PLASTIC DEFORMATION CAPACITY OF H-SHAPED BEAMS WITH CONTINUOUS RESTRAINT ON UPPER FLANGE
نویسندگان
چکیده
منابع مشابه
azerbaijans political development after the collapse of soviet union and implication on relation with the islamic republic of iran
در فصل اول این پایاین نامه در خصوص تاریخ کشور اذربایجان قبل و بعد از جدایی این کشور از ایران مورد بررسی قرار گرفته است ودر فصل دوم تحولات سیاسی این کشور بعد از 1991 و در واقع بعد از فروپاشی شوروی و دولتهایی که روی کار امدند در از جمله دولت ابولفضل ایلچی بیگ،دولت حیدر علی اف وبعد از او پسرش الهام علی اف و نگرش هرکدام از این دولتها به سیاسیت خارجی اذربایجان مورد اشاره قرار گرفته است.در ودر فصل سو...
Plastic Deformation Characteristics of Continuous Confined Strip Shearing Process Considering the Deformation Homogeneity and Damage Accumulation
In the present investigation, two dimensional elastoplastic finite element analysis was conducted to assess the deformation characteristics of Al 1100 alloy during continuous confined strip shearing (C2S2) process. The results of simulations showed that the plastic strain distribution across the deformed sample is non-uniform irrespective of the amount of friction and C2S2 die angle. The most u...
متن کاملplastic hinge rotation capacity of reinforced concrete beams
a parametric study is performed to assess the influence of the tension reinforcement index, ( ω = ρ fy /f bc), and the bending moment distribution (loading type) on the ultimate deformation characteristics of reinforced concrete (rc) beams. the analytical results for 15 simply supported beams with different amounts of tension reinforcement ratio under three different loading conditions are pres...
متن کاملThe effect of the angle upper edge in shaped noise barriers with a T-shaped upper edge
Background and Objective: Efforts to improve the effectiveness of noise barriers have been made, including shape, aesthetics, form and gender. Therefore, the aim of this study was to investigate the effect of the angle upper edge in shaped noise barriers with a T-shaped upper edge. Materials and Methods: A 2D boundary element method (BEM) was used to predict the insertion loss of the tested ba...
متن کاملOptimum Designing of Forging Preform Die for the H-shaped Parts Using Backward Deformation Method and Neural Networks Algorithm
In a closed die forging process, it is impossible to form complex shapes in one stage, and thus it becomes necessary to use preform dies. In the present study, Backward Deformation Method and FE simulation via ABAQUS software has been used in order to design preform die of the H-shaped parts. In the Backward Deformation Method, the final shape of the part is considered as a starting point and u...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 2018
ISSN: 1340-4202,1881-8153
DOI: 10.3130/aijs.83.491