Colloidal Processing and Fracture Strength of Alumina Prepared from Partially Agglomerated Theta-Phase Powder
نویسندگان
چکیده
منابع مشابه
AN INFLUENCE OF PHASE DEVELOPMENT ON MECHANICAL STRENGTH OF ALUMINA-COPPER JOINT PREPARED BY MOLYMn METHOD
Abstract: The effect of phase development on peel strength of alumina-copper metalized joint has been investigated. The alumina-copper joint was prepared in three stages. The alumina substrate was, first, metalized at 1500°C in H2-furnace by a new formulation. In the second step, a nickel layer was electroplated on the metalized layer with approximately 10µm thickness. Finally, copper strip...
متن کاملProcessing and Properties of Zirconia-Toughened Alumina Prepared by Gelcasting
Zirconia-toughened alumina (ZTA) using yttria-stabilised zirconia is a good option for ceramic-ceramic bearing couples for hip joint replacement. Gelcasting is a colloidal processing technique capable of producing complex products with a range of dimensions and materials by a relatively low-cost production process. Using gelcasting, ZTA samples were prepared, optimising the stages of fabricatio...
متن کاملFreeze granulation: Powder processing for transparent alumina applications
se of freeze granulated powders is successfully used as an industrially viable alternative to loose powder sintering for transparent polycrystalline lumina (PCA). Freeze granulation with narrow granule size distribution was realized after suspension condition optimization, with very good owability and regular spherical shapes. The key factors are low viscosity slurries linked to the complex int...
متن کاملSynthesis of cordierite powder from talc, diatomite and alumina
A cordierite powder was synthesized from a batch composition of talc, diatomite and alumina. Sintered samples of the synthesized cordierite were characterized by X-ray diffraction (XRD), differential thermal analysis (DTA), and Rietveld analysis. The XRD analysis showed hexagonal or a-cordierite (indialite) as a major phase along with MgAl2O4 spinel and cristobalite as secondary phases in the s...
متن کاملFracture Mechanism of CoCrMo Porous Nano-composite Prepared by Powder Metallurgy Route
The main aim of this research was to find the mechanism for the failure of the CoCrMo porous nano-composite by characterizing microstructural changes and fractured surface after compression test. For this purpose, porous nano-composites were prepared with the addition of bioactive glass nano-powder to Co-base alloy with 22.5% porosity by the combination of space-holder and powder metallurgy tec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 1996
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.104.277