Colloidal Spray Deposition Technique for the Processing of Thin Film Solid Oxide Fuel Cells
نویسندگان
چکیده
منابع مشابه
Thermodynamic Stability of Gadolinia-Doped Ceria Thin Film Electrolytes for Micro-Solid Oxide Fuel Cells
Next-generation micro-solid oxide fuel cells for portable devices require nanocrystalline thin-film electrolytes in order to allow fuel cell fabrication on chips at a low operation temperature and with high power outputs. In this study, nanocrystalline gadolinia-doped ceria (Ce0.8Gd0.2O1.9!x) thin-film electrolytes are fabricated and their electrical conductivity and thermodynamic stability are...
متن کاملOptimization of the Automated Spray Layer-by-Layer Technique for THin Film Deposition
The operational parameters of the automated Spray-LbL technique for thin film deposition have been investigated in order to-identify their effects on film thickness and roughness. We use the automated Spray-LbL system developed at MIT by the Hammond lab to build 25 bilayer films of poly (ally amine hydrochloride) (PAH) and poly (acrylic acid) (PAA). Each of the 10 operational parameters of this...
متن کاملAnode-Supported Solid Oxide Fuel Cells with Thin Film Electrolyte for Operation at Reduced Temperatures
In order to reduce the operating temperature of solid oxide fuel cells (SOFCs), anodesupported cells incorporating thin film (~10 μm) electrolytes in conjunction with anode/electrolyte and cathode/electrolyte interlayers were studied. Anode supported button cells were prepared through a conventional approach and were analyzed via Scanning Electron Microscopy (SEM), Polarization, and Electrochem...
متن کاملElectrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects
In the present study, Mn - Cr spinel powder was synthesized through a solid state reaction. In the next step, the electrophoretic deposition (EPD) method was used to apply the MnCr2O4 spinel, as an oxidation-resistant layer, on SUS 430 stainless steel in a potential of 300 V/cm. The coated and uncoated samples were then pre-sintered in air at 900 °C for 3 h followed by cyclic oxidation at 800 °...
متن کاملMethods of simulating thin film deposition using spray pyrolysis techniques
Integration of thin tin oxide film formation into CMOS technology is a fundamental step to realize sensitive smart gas sensor devices. Spray pyrolysis is a deposition technique which has the potential to fulfil this requirement. A model for spray pyrolysis deposition is developed and implemented within a Level Set framework. Two models for the topography modification due to spray pyrolysis depo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ECS Proceedings Volumes
سال: 1999
ISSN: 0161-6374,2576-1579
DOI: 10.1149/199919.0172pv