Coloring the Aluminum Surface with Dye Emulsions and Pigment Colloids in Plasma Electrolytic Oxidation
نویسندگان
چکیده
منابع مشابه
Sound Absorption Characteristics of Aluminum Foams Treated by Plasma Electrolytic Oxidation
Open-celled aluminum foams with different pore sizes were fabricated. A plasma electrolytic oxidation (PEO) treatment was applied on the aluminum foams to create a layer of ceramic coating. The sound absorption coefficients of the foams were measured by an impedance tube and they were calculated by a transfer function method. The experimental results show that the sound absorption coefficient o...
متن کاملProcess Monitoring of Plasma Electrolytic Oxidation
Plasma electrolytic oxidation (PEO) is a potential technique to coat a dense ceramic oxide layer on the surface of light metals, e.g. Al, Mg or Ti. In our PEO process, Al-pieces are emerged in aqueous solutions containing dissolved silicate/alkali, e.g. KOH/NaOH and K 2 SiO 3 /Na 2 SiO 3. Using a DC-pulsed system with 20Hz, micro-arcs are induced at the surface of the pieces randomly and plasma...
متن کاملPlasma Electrolytic Oxidation Coatings on Lightweight Metals
Lightweight metals, e.g. aluminum (Al), magnesium (Mg), titanium (Ti) and their alloys are of great importance for applications in various machinery and transportation system, espe‐ cially in aerospace and automobile products due to their high strength-to-weight ratio and superior physical and chemical performances. However, their poor tribological properties, such as low wear resistance, high ...
متن کاملReview of the Soft Sparking Issues in Plasma Electrolytic Oxidation
A dense inner layer is highly valued among the surface coatings created through plasma electrolytic oxidation (PEO) treatment, because the PEO coating has been troubled by inherent porosity since its conception. To produce the favored structure, a proven technique is to prompt a soft sparking transition, which involves a sudden decrease in light and acoustic emissions, and a drop in anodic volt...
متن کاملplasma electrolytic oxidation of 2024-t3 aluminum alloy and study of its corrosion resistance and tribological behavior
in this study, plasma electrolytic oxidation of 2024-t3 aluminum alloy was investigated. the electrolyte used in this investigation was an alkaline solution containing additives of silicate, phosphate, potassium hydroxide and glycerin. a conventional dc power source with a low applied voltage was employed. corrosion resistance of the oxide layer was investigated by means of tafel plots and elec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DEStech Transactions on Materials Science and Engineering
سال: 2017
ISSN: 2572-889X
DOI: 10.12783/dtmse/ammme2016/6916