Combined Influence of Terrain Modell and Roughness in Dam Break Wave Simulation
نویسندگان
چکیده
منابع مشابه
Dam Break Wave of Thixotropic Fluid
Thixotropy is the characteristic of a fluid to form a gelled structure over time when it is not subjected to shearing, and to liquefy when agitated. Thixotropic fluids are commonly used in the construction industry e.g., liquid concrete and drilling fluids , and related applications include some forms of mud flows and debris flows. This paper describes a basic study of dam break wave with thixo...
متن کاملBreak fill-dam simulation using GeoStudio (case study: Safarood earth dam, Kerman)
One of the main reason of earth-dam breaks is inner erosion which is caused by washing fine soil particles and finally lead to seepage inside the dam. Seepage will decrease effective tension in the earth-dam's core and arching phenomena is occurred. More settlement of core than to shell is the consequence of arching and occurrence of cracking. In this paper, GeoStudio software based on finite e...
متن کاملDam Break Wave with Energy Dissipation : Two Case Studies
Abstract: Flood waves resulting from dam break and spillway gate malfunction may have dramatic impacts. Two related cases are the overtopping of a dam by flood waves and a sudden water release down a stepped cascade. In each instance, some energy dissipation takes place and classical dam break theory are inappropriate. Both cases were investigated in large-size facilities and in a prototype. Ne...
متن کاملNumerical simulation of flood wave propagation due to failure of dam watersheds in fluent model
By numerical simulation of the phenomenon of failure of dams and the flow of their flow, it is possible to design more precisely the structures and their location. The purpose of this study was to investigate the wave propagation phenomenon due to the failure of the rocky mortar-watering dam in the Marivan sub-basin of Zarivar in two-dimensional and three-dimensional models using the Fluent mod...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S Web of Conferences
سال: 2018
ISSN: 2267-1242
DOI: 10.1051/e3sconf/20184006026