Combined simulation of fatigue crack nucleation and propagation based on a damage indicator
نویسندگان
چکیده
منابع مشابه
Introduction of a Fretting-Fatigue Mapping concept: Development of a dual crack nucleation – crack propagation approach to formalize Fretting Fatigue damage
Fretting fatigue induced by combined localized cyclic contact motion and external bulk fatigue loadings may result in premature and dramatic failure of the contacting components. Depending on fretting and fatigue loading conditions, crack nucleation and possibly crack propagation can be activated. This paper proposes a procedure for estimating these two damage thresholds. The crack nucleation b...
متن کاملFretting Fatigue with Cylindrical-On-Flat Contact: Crack Nucleation, Crack Path and Fatigue Life
Fretting fatigue experiments and finite element analysis were carried out to investigate the influence of cylindrical-on-flat contact on crack nucleation, crack path and fatigue life of medium-carbon steel. The location of crack nucleation was predicted using the maximum shear stress range criterion and the maximum relative slip amplitude criterion. The prediction using the maximum relative sli...
متن کاملData-driven Fatigue Crack Evaluation based on Wave Propagation Data
8 This project presents a machine learning based fatigue crack sensor 9 evaluation scheme without using a physical model. A supervised binary 10 classification problem is defined to distinguish damaged steel specimens 11 from intact specimens. Sets of time-series wave propagation data collected 12 by the fatigue crack sensor are utilized for the proposed scheme. In order to 13 apply supervised ...
متن کامل3d Microscale Characterization and Crystal-plastic Fe Simulation of Fatigue-crack Nucleation and Propagation in an Aluminum Alloy
Critical steps toward designing and developing modern materials include observing, simulating, and predicting 3D deformation and cracking mechanisms at various length scales. In this work, advanced characterization and simulation techniques are employed to study the micromechanisms involved in nucleation and propagation of fatigue cracks in an aluminum alloy used in pressure-vessel structures. ...
متن کاملAn Artificial Neural Network-Based Algorithm for Evaluation of Fatigue Crack Propagation Considering Nonlinear Damage Accumulation
In the aerospace and aviation sectors, the damage tolerance concept has been applied widely so that the modeling analysis of fatigue crack growth has become more and more significant. Since the process of crack propagation is highly nonlinear and determined by many factors, such as applied stress, plastic zone in the crack tip, length of the crack, etc., it is difficult to build up a general an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Frattura ed Integrità Strutturale
سال: 2016
ISSN: 1971-8993
DOI: 10.3221/igf-esis.38.21