Combustion Properties of Impregnated and Heat-Treated Wood Material
نویسندگان
چکیده
منابع مشابه
Handling of impregnated waste wood and characterization of ash residues after combustion of the wood
In the next ten years the amounts of waste wood impregnated with Cu, Cr and As (CCA) is expected to increase dramatically world wide. CCA has been widely used for wood preservation since the early 1950s and because the fixation of CCA in the wood is good, the concentration of CCA is still high, when the wood is at the end of service. In some countries e.g. Denmark and Norway, the use of As for ...
متن کاملProperties of Wood for Combustion Analysis
A systematic compilation of 21 different property values of wood and bark fue1 was made to facilitate the engineering analysis and modeling of combustion systems. Physical property values vary greatly and properties such as density, porosity, and internal surface area are related to wood species whereas bulk density, particle size, and shape distribution are related to fuel preparation methods....
متن کاملUpdate for Combustion Properties of Wood Components
The combustion properties of various biomass and wood materials from various references and from our laboratory were reanalysed. The net heat of combustion for cellulosic materials was found to be 13.23 kJ/g times the ratio of stoichiometric oxygen mass to fuel mass, ro, regardless of the material composition. Bomb calorimeter data for original, charred and volatilized material components provi...
متن کاملPHYSICAL AND MECHANICAL PROPERTIES OF HEAT TREATED WOOD FROM Aspidosperma populifolium, Dipteryx odorata AND Mimosa scabrella
Heat treatment improves some wood properties namely: equilibrium moisture, dimensional stability and durability and mechanical properties. In this study, the heat treatment was applied to woods of three natural species from Brazil: Aspidosperma populifolium (peroba mica), Dipteryx odorata (cumaru) and Mimosa scabrella (bracatinga). The woods were heated in an oven under vacuum and under nitroge...
متن کاملEvaluation of Physical and Mechanical Properties of Wild Cherry Wood Heat-treated Using the Thermowood Process
The aim of this study is to determine the change of some physical properties (oven-dry density, weight loss, swelling and anti-swelling efficiency) and mechanical properties (compression strength parallel to grain, bending strength, modulus of elasticity in bending, janka-hardness (cross-section, radial, tangential), impact bending strength and tension strength perpendicular to grain) of wild c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Polytechnic
سال: 2018
ISSN: 1302-0900
DOI: 10.2339/politeknik.453808