Combustion Rate of Low Grade Coal with Air in the Fluidized Bed Reactor

Two Phase Modeling of Char Combustion in a Circulating Fluidized Bed Reactor Using ASPEN PLUS

In this paper, combustion of char in the riser of circulating fluidized bed was modeled using ASPEN PLUS. Since physical and chemical phenomena are involved in the process, the model integrates the two-phase hydrodynamic sub-model with the reaction sub-model derived from the literature. In the proposed model, the fluidized bed is divided into several sections and the behavior of each section wa...

Control of a Fluidized Bed Polyethylene Reactor

In present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. A double active sites model for Ziegler-Natta catalysts is used for simulation of polymerization reaction. Hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with different...

Biomass steam-reforming in a low throughput fluidized bed reactor

This work presents the results from biomass gasification tests in a low throughput fluidized bed membrane reactor (FBMR) and compares them with two-phase model predictions. The operating temperature was decreased to 550C, while an equimolar steam/cellulose ratio was used. The profiles of kinetics limitation and biomass conversion were analysed when a palladium (Pd) membrane for hydrogen separat...

Emissions from the combustion of eucalypt and pine chips in a fluidized bed reactor.

Interest in renewable energy sources has increased in recent years due to environmental concerns about global warming and air pollution, reduced costs and improved efficiency of technologies. Under the European Union (EU) energy directive, biomass is a suitable renewable source. The aim of this study was to experimentally quantify and characterize the emission of particulate matter (PM2.5) resu...

Unsteady-State Modeling of the Fluidized Bed Polyethylene Reactor