Commercial alkaline earth boroaluminosilicate glasses for sealing solid oxide cell stacks. Part II: Characterization of devitrification and glass-ceramic phase assemblages
نویسندگان
چکیده
منابع مشابه
Improving sealing, electrical contacts, and corrosion resistance in solid oxide fuel cell stacks
Solid oxide fuel cells are high temperature electrochemical devices for direct conversion of fuel and oxidant to electricity and heat. The high temperature and dual atmosphere creates challenges for the materials in solid oxide fuel cell stacks. In this thesis SOFC stack materials were studied and developed. SOFC stacks are assembled at room temperature, then heated up, conditioned and operated...
متن کاملPhase Equilibria in Systems Involving the Rare - Earth Oxides . Part II . Solid State Reactions in Trivalent Rare - Earth Oxide Systems
Selected mixtures in 2 l binary and 9 ternary rare-earth oxide syste ms were studied by X-ray diffraction after heat treatment aL 1,650° C and above. Two graphs were drawn to show specific r egions of stability for t he various strucLure types. Each givcs t he a verage ionic rad ius of constiLuent cations versus the mole percent of the smaller cation. One diagram is es~e ntiall :-' divided inLo...
متن کاملChemical precipitation and characterization of multicomponent Perovskite Oxide nanoparticles – possible cathode materials for low temperature solid Oxide fuel cell
A set of multicomponent perovskite oxide nanoparticles based on La1-xSrxCo1-yFeyO3-δ(LSCF) were prepared by a simple chemical precipitation method for application in low temperature solid oxide fuel cells (LT-SOFC) as cathode materials. The precursor materials used in this synthesis were lanthanum nitrate hexahydrate [La(NO3)<su...
متن کاملChemical precipitation and characterization of multicomponent Perovskite Oxide nanoparticles – possible cathode materials for low temperature solid Oxide fuel cell
A set of multicomponent perovskite oxide nanoparticles based on La1-xSrxCo1-yFeyO3-δ(LSCF) were prepared by a simple chemical precipitation method for application in low temperature solid oxide fuel cells (LT-SOFC) as cathode materials. The precursor materials used in this synthesis were lanthanum nitrate hexahydrate [La(NO3)<su...
متن کاملCeramic - Based Anode for Solid - Oxide Fuel Cell Utilizes
490 MRS BULLETIN/JULY 2002 nated by intergranular fracture, while in AJM it was in a manner resembling ductile behavior. Improved surface finishing by AJM resulted in a 15% improvement in flexural strength, compared with both ground and ground-plus-lapped samples. The researchers concluded that a higher compressive residual stress observed on the AJM-processed surface, combined with the smoothe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Applied Ceramic Technology
سال: 2017
ISSN: 1546-542X
DOI: 10.1111/ijac.12834