Commercialization‐Driven Electrodes Design for Lithium Batteries: Basic Guidance, Opportunities, and Perspectives (Small 43/2021)

Nanowire Electrodes for Advanced Lithium Batteries

*Correspondence: Liqiang Mai , State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, WUT-Harvard Joint Nano Key Laboratory, Wuhan University of Technology, 122 Luoshi Road, Wuhan 430070, China e-mail: [email protected] Since the commercialization of lithium ion batteries (LIBs) in the past two decades, rechargeable LIBs have become widespread power sources for por...

Reliable reference electrodes for lithium-ion batteries

Nanostructured Lithium-Aluminum Alloy Electrodes for Lithium-Ion Batteries

Electrodeposited aluminum films and template-synthesized aluminum nanorods are examined as negative electrodes for lithium-ion batteries. The lithium-aluminum alloying reaction is observed electrochemically with cyclic voltammetry and galvanostatic cycling in lithium half-cells. The electrodeposition reaction is shown to have high faradaic efficiency, and electrodeposited aluminum films reach t...

Engineering nanostructured electrodes away from equilibrium for lithium-ion batteries

Boosted by the rapid advances of science and technology in the field of energy materials, Li-ion batteries have achieved significant progress in energy storage performance since their commercial debut in 1991. The development of nanostructured electrode material is regarded as one of the key potentials for the further advancement in Li-ion batteries. This feature article summarizes our recent e...

Kinetic characteristics of mixed conductive electrodes for lithium ion batteries

The rate performances of four mixed conductive electrodes (Li4/3Ti5/3O4, LiFePO4, LiCoO2 and LiCo1/3Ni1/3Mn1/3O2) were investigated using alvanostatic charge/discharge, electrochemical impedance Spectroscopy (EIS) and galvanostatic intermittent titration (GITT). These four electrode aterials can be roughly divided into two groups according to the structure change during Li intercalation/extract...