Common mode chokes and optimisation aspects
نویسندگان
چکیده
منابع مشابه
Optimisation of shock absorber process parameters using failure mode and effect analysis and genetic algorithm
The various process parameters affecting the quality characteristics of the shock absorber during the process were identified using the Ishikawa diagram and by failure mode and effect analysis. The identified process parameters are welding process parameters (squeeze, heat control, wheel speed, and air pressure), damper sealing process parameters (load, hydraulic pressure, air pressure, and ...
متن کاملStudy and optimisation of the common mode exploitation for xDSL application
This report explains how the common mode can be exploited in order to increase the capacity of xDSL systems in a binder MIMO channel. Indeed, N copper pairs can use either differential or/and common modes to transmit N or (2N-1) signals. At the receiver side, the common mode can be used to mitigate RFI or/and transmit additional data signal. However, some care should be taken with egress. A cha...
متن کاملControlling Common-Mode Voltages in Multilevel Inverters
This paper proposes a novel method based on pulse width modulation techniques toreduce and control the common-mode voltage in three-phase multilevel inverters. Besides controllingthe common-mode voltage, this method is capable of controlling capacitors voltages and load currentswith low switching losses and harmonic contents. In fact, due to the existence of different pulsepatterns and the poss...
متن کاملMeasurement setup for differential-mode and common-mode channels
Since there is no model available for mixed differential-mode and common-mode transmission, this report gives a measurement setup to determine the channel transfert function of the differential-mode and common-mode channels, as well as the leaked channel from the differential-mode to the common-mode and conversely at the transmitting end and the receiving end. This measurement setup consists of...
متن کاملA Fully Balanced Pseudo-Differential OTA With Common-Mode Feedforward and Inherent Common-Mode Feedback Detector
A pseudo-differential fully balanced fully symmetric CMOS operational transconductance amplifier (OTA) architecture with inherent common-mode detection is proposed. Through judicious arrangement, the common-mode feedback circuit can be economically implemented. The OTA achieves a third harmonic distortion of 43 dB for 900 mVpp at 30 MHz. The OTA, fabricated in 0.5m CMOS process, is used to desi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Radio Science
سال: 2014
ISSN: 1684-9973
DOI: 10.5194/ars-12-143-2014