Common-Source Active Clamped Complex Type Converter
نویسندگان
چکیده
منابع مشابه
Loss Balancing in Three-level Active-neutral-point-clamped Converter
The 3L-NPC (Neutral-Point-Clamped) is the most popular multilevel converter used in high-power medium-voltage applications. An important disadvantage of this structure is the unequal distribution of losses among the switches. The performances of 3L-NPC structure were improved by developing the 3L-ANPC (Active-NPC) converter which has more degrees of freedom. In this paper the switching states a...
متن کاملA Developed Structure of Step-Up DC/DC Converter by Using Coupled Inductor and Active Clamped Circuit
In this paper, a new structure of step-up dc-dc converter by using coupled inductor and active-clamped circuit is proposed. The proposed converter generates high voltage gain in comparison with the conventional dc-dc converters. Duo to using active-clamped circuit in the proposed topology the voltage stress on main switch is reduced. In addition the zero voltage switching (ZVS) in ON-state of m...
متن کاملPerformance of 3-Phase Neutral Point Clamped Active Front End Multilevel Converter
For medium voltage, high power applications 3-phase neutral point clamped AC-DC multilevel converters are becoming a good choice. In this paper the performance of a 3-phase neutral point clamped Active Front End three level converter for high power application with simplified control scheme is presented. A complete mathematical model of the control scheme is developed and performance is investi...
متن کاملDiode-Clamped Based Indirect Matrix Multilevel Converter Topology
This paper presents a novel sparse matrix converter configuration that needs no bulky energy storage capacitors or inductors, and employs only unidirectional power semiconductor switches. The source side bridge is switched at the line frequency and therefore, this allows the use of the low speed high power rating switches. This feature and the use of diode-clamped multilevel topology at the out...
متن کاملPower Factor Correction (Boost PFC Converter with Two-Switch Clamped Flyback Converter)
The devices such as diode and thyristor are generally used in industrial, commercial and residential applications hence need to undergo rectification for their proper functioning and operation. They are connected to the grid comprising of non-linear loads and thus have non-linear input characteristics, which results in production of non-sinusoidal line current. Due to the increasing demand of t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Transactions on Electronics, Information and Systems
سال: 2007
ISSN: 0385-4221,1348-8155
DOI: 10.1541/ieejeiss.127.235