COMPACT SHORTED MICROSTRIP PATCH ANTENNA FOR DUAL BAND OPERATION
نویسندگان
چکیده
منابع مشابه
Compact Shorted Microstrip Patch Antenna for Dual Band Operation
In the present paper notch loaded shorted microstrip patch antenna has been analysed using cavity model. The proposed antenna shows dual band operation which depends on notch dimensions as well as shorting wall. The frequency ratio is found to be 1.5278 for the notch loaded rectangular patch, while in notch loaded shorted patch, the frequency ratio varies from 2.9764 to 2.725 for increasing val...
متن کاملDual Band Shorted Rectangular Microstrip Antenna
The compact rectangular microstrip antenna is realized by placing the shorting post or plate along the zero field line at the fundamental mode of the patch. The dual band antenna is realized by placing the stub on the edges of the patch. In this paper, first a compact shorted rectangular microstrip antenna is discussed. Further a dual band antenna realized by placing the stub on the opposite ed...
متن کاملDual Band Shorted Sectoral Microstrip Antenna
The dual band microstrip antenna is realized by placing the open circuit stub or by cutting the slot inside the patch. The compact microstrip antenna is realized by placing the shorting post or plate along the zero field line at the fundamental mode of the patch. In this paper, a compact variation of equilateral triangular microstrip antenna, a shorted 600 sectoral microstrip antenna is discuss...
متن کاملA Dual-polarized Shorted Microstrip Patch Antenna for Wideband Application
A new design of a wideband dually-polarized shorted microstrip patch antenna coupled to hook shaped probes is presented. The antenna is designed to operate around 4 GHz. The mechanisms of the shorted microstrip patch antenna provide wider impedance bandwidth over 37%. The shorted patch is smaller than as with to the unshorted patch. The present design provides about 40 dB isolation level betwee...
متن کاملBroadband Stacked Microstrip Patch Antenna for L-Band Operation: FDTD Modeling
This paper presents a novel implementation of an electromagnetically coupled patch antenna using air gap filled substrates to achieve the maximum bandwidth. We also propose an efficient modeling technique using the FDTD method which can substantially reduce the simulation cost for modeling the structure. The simulated results have been compared with measurement to show the broadband behavio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Progress In Electromagnetics Research C
سال: 2009
ISSN: 1937-8718
DOI: 10.2528/pierc09071007