Comparative analysis of the flexural capacity of conventional steel beams with Castellated beams
نویسندگان
چکیده
منابع مشابه
Flexural Capacity of Rc Beams Strengthened with Srp and Srg
The use of externally bonded Steel-Reinforced Polymer (SRP) and Steel Reinforced Grout (SRG) composites is a promising new technology for increasing the flexural and shear capacities of reinforced concrete (RC) members. The reinforcement system in these composites is a sheet made up of unidirectional cords consisting of tightly wound ultra high strength steel wires. The reinforcement can be mol...
متن کاملGeneralized Warping In Flexural-Torsional Buckling Analysis of Composite Beams
The finite element method is employed for the flexural-torsional linear buckling analysis of beams of arbitrarily shaped composite cross-section taking into account generalized warping (shear lag effects due to both flexure and torsion). The contacting materials, that constitute the composite cross section, may include a finite number of holes. A compressive axial load is applied to the beam. The...
متن کاملFlexural Behavior of Reinforced HPFRCC Beams
High Performance Fiber Reinforced Cementitious Composite (HPFRCC) materials exhibit strain hardening behavior with multiple cracking under tensile loading. In this paper, experimental and parametric studies are performed to assess the influence of using HPFRCC material instead of normal concrete in reinforced concrete beams. After calibrating the experimental results, the analytical results inc...
متن کاملFlexural Behaviour of RCC Beams
Concrete is the material which is rapidly used in various conditions to sustain the compression loads and the corresponding bending and shear stress due to the applied compressive loads. The major drawback in concrete is that it is poor in tension though it is very efficient in compression. Hence to overcome this major drawback the concrete must be reinforced such that to make a homogeneous sub...
متن کاملBehavior of Castellated I Beams Encased in Concrete
Five methods are introduced for design of castellated I beams encased in concrete. One of the methods, plastic analysis, is thoroughly explained and the relevant equations are developed. Eight castellated I beams encased in concrete are made and tested. The theoretical design methods are all compared with the test results and the safety factor for each method is calculated. The results show tha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Earth and Environmental Science
سال: 2021
ISSN: 1755-1307,1755-1315
DOI: 10.1088/1755-1315/780/1/012013