COMPARATIVE EVALUATION OF EFFECT OF TWO LIGHT CURING UNITS ON MECHANICAL PROPERTIES OF FILTEK BULK FILL COMPOSITE
نویسندگان
چکیده
Context:The quality of light curing units can profoundly influence mechanical properties dental composite materials. Aim: To compare effect Woodpecker RTA Mini-S and Elipar Deep Cure-L onmechanical (compressive strength, diametral tensile strength microhardness) Filtek Bulk-Fill. Methods Materials: A total 32 samples Bulk Fill were divided into 2 equal groups (n=16). 12 in each group fabricated using a tooth shaped mold 4 circular rings to test compressive microhardness respectively. Theblocks evaluated for the above parameters Universal Testing Machine Vickers Microhardness Tester.Independent sample-t was used this study (p< 0.05). Results: The results showed that composites cured unit better difference between statistically significant (p < 0.05) Conclusion: It concluded higher intensity output conjugation with bulk fill are likely give results.
منابع مشابه
Effect of IR radiation of light curing units on mechanical properties of micro hybrid dental composite
This article has no abstract.
متن کاملThe effect of curing intensity on mechanical properties of different bulk-fill composite resins
OBJECTIVE The purpose of this study was to investigate the effects of two curing light intensities on the mechanical properties (Vickers microhardness, compressive strength, and diametral tensile strength) of bulk-fill resin-based composites (RBCs). MATERIALS AND METHODS Four commercially available bulk-fill RBCs (Tetric® N-Ceram, SonicFill™, Smart Dentin Replacement (SDR™) Posterior Flowable...
متن کاملEffect of preheating and light-curing unit on physicochemical properties of a bulk fill composite
OBJECTIVE The aim of this study is to evaluate the effect of composite preheating and polymerization mode on degree of conversion (DC), microhardness (KHN), plasticization (P), and depth of polymerization (DP) of a bulk fill composite. METHODS Forty disc-shaped samples (n = 5) of a bulk fill composite were prepared (5 × 4 mm thick) and randomly divided into 4 groups according to light-curing ...
متن کاملEffect of Curing Time on Polymerization Rate of Bulk-Fill Composite Resins
Objectives: The aim of this study was to compare polymerization depth of two bulk-fill and one conventional composite cured for different times. Methods: This in vitro experimental study was conducted on 54 composite samples (2×4×10mm) fabricated of Tetric N-Ceram bulk-fill, x-tra fil bulk-fill, and Grandio conventional composite cured for 20, 30, and 40 seconds. The microhardnes...
متن کاملComparative evaluation of the effect of Light Emitting Diode (LED) and Quartz Tungsten Halogen (QTH) light curing units on color stability of Filtek Z350 XT
Introduction:Discoloration of the resin-based composites is a common problem in restorative dentistry. There are many factors associated with the discoloration of dental materials in the oral environment. The purpose of this study was to evaluate the color changes in a nano-composite cured with a quartz-tungsten-halogen (QTH) and light emitting diode (LED) unit. Methods:80 disk-shaped specim...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International journal of advanced research
سال: 2021
ISSN: ['2707-7802', '2707-7810']
DOI: https://doi.org/10.21474/ijar01/12424