Comparison analysis of induction and line-start synchronous reluctance motors
نویسندگان
چکیده
منابع مشابه
Optimum Design Parameters for Synchronous Reluctance Motors
A series of synchronous reluctance motors (RSM) are analysed using finite element methods. The amount of iron in each rotor is kept the same. It is shown that the saliency ratio is not only dependent on the flux guide reluctance factor but also on the position or span of flux guides. It is also shown that an axially laminated design may not be an optimum configuration due to large number of flu...
متن کاملNovel Unified Control Method of Induction and Permanent Magnet Synchronous Motors
Many control schemes have been proposed for induction motor and permanent magnet synchronous motor control, which are almost highly complex and non-linear. Also, a simple and efficient method for unified control of the electric moto are rarely investigated. In this paper, a novel control method based on rotor flux orientation is proposed. The novelties of proposed method are elimination of q-ax...
متن کاملInduction Motors Thermal Analysis
Original scientific paper The temperature distribution over the cross-section of an induction motor is calculated at the steady state and transient condition. In order to develop smaller and more efficient electric motors, there is a necessity to carry out more thermal analysis in parallel with the traditional electromagnetic design. It has been found that attention to the thermal design can be...
متن کاملComparison of Synchronous Reluctance Machines with High-Anisotropy Rotors
In terms of torque capability, power factor and efficiency, synchronous reluctance machines with high-anisotropy rotors represent an alternative to conventional induction machines. In particular, they have very robust rotors and can therefore operate at constant power in a wider field-weakening range. The paper discusses a comparison of the various machine concepts using an identical machine ge...
متن کاملSimple Design Approach for Low Torque Ripple and High Output Torque Synchronous Reluctance Motors
The rotor design of Synchronous Reluctance Motors (SynRMs) has a large effect on their efficiency, torque density and torque ripple. In order to achieve a good compromise between these three goals, an optimized rotor geometry is necessary. A finite element method (FEM) is a good tool for the optimization. However, the computation time is an obstacle as there are many geometrical parameters to b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ITM Web of Conferences
سال: 2019
ISSN: 2271-2097
DOI: 10.1051/itmconf/20192801005