Comparison between measured and computed magnetic flux density distribution of simulated transformer core joints assembled from grain-oriented and non-oriented electrical steel

Localised surface vibration and acoustic noise emitted from laboratory scale transformer cores assembled from grain-oriented electrical steel

Comparative Harmonic Loss Measurement of Grain Oriented and Non-oriented Magnetic Sheets Using a High Precision Single Sheet Tester

 Abstract: Local flux may be distorted in many regions of core, although total flux is usually sinusoidal. When attempting to predict the loss distribution in materials operating under localized distorted flux conditions, which occur in machines and transformer cores, it is essential that proper account of the waveform be taken. Moreover for development of new magnetic materials and generation ...

Modelling transformer core joints using Gaussian models for the magnetic flux density and permeability

Simple equivalent permeability and reluctance models are obtained for the transformer core joints from the analysis of the magnetic flux. It is shown that the flux variations in the joint zone can be fitted with simple Gaussian expressions suitable for transformer design purposes. These models are derived from 2D and 3D finite element simulations. The magnetic flux distribution in the transform...

Secondary recrystallization characteristics of 3%Si grain-oriented electrical steel

A secondary recrystallization Lab study focusing on the secondary recrystallization temperature and magnetic properties was carried out on cold rolling industrial samples of 3%Si grain-oriented electrical steel produced by low slab reheating temperature technology. The results showed a secondary recrystallization temperature, determined by the observed grain size change, of 1080 C with annealin...

Effect of Cold Rolling sequence on the Texture Development and Magnetic Loss of Grain Oriented Electrical Steels

Electrical steels are important alloys widely used in electrical instruments. The magnetic properties and low core loss of grain oriented silicon steels are closely related to the sharpness of Goss texture ({110} ).The direction of is the softest direction for magnetism.  In this work, the microstructure and dependence of orientation density along the major texture fibers on the applied cold ro...