Comparison of three sorbents for organic pollutant removal in drinking water

Removal of Organic Pollutant from Water by Modified Bentonite

Application of mine waste for wastewater treatment: Efficient organic pollutant removal

In this research, a high porous silicate mining waste that was prepared from Syah Kamar Polymetal Porphyry mine in order to malachite green dye (MG) removal has been applied. The characterization of this natural mineral was determined using the XRD, XRF, SEM and FT-IR analysis. The MG adsorption onto high porous activated waste was studied based on the parameters of pH, temperature, adsorbent d...

Screening Indoor Plants for Volatile Organic Pollutant Removal Efficiency

Twenty-eight ornamental species commonly used for interior plantscapes were screened for their ability to remove five volatile indoor pollutants: aromatic hydrocarbons (benzene and toluene), aliphatic hydrocarbon (octane), halogenated hydrocarbon [trichloroethylene (TCE)], and terpene (a-pinene). Individual plants were placed in 10.5-L gas-tight glass jars and exposed to ’10 ppm (31.9, 53.7, 37...

evaluation of some natural zeolites and their relevant synthetic types as sorbents for removal of arsenic from drinking water

the purpose of this study was to find a relatively inexpensive method for removal of arsenate and arsenite from drinking water. the capability of iranian natural clinoptilolites, relevant synthetic zeolites a and p and iron(п) modified of them was investigated for the uptake of arsenic anions from drinking water. data obtained from ion-exchange using batch (static) technique showed that among t...

Removal of pollutant heterocyclic dyes from water with ZnO adsorbent

In this study, Copper oxide as a good and inexpensive adsorbent has been introduced and used for the removal of erythrosine and red carmoisine dyes from several water solutions successfully. The effect of various parameters such as pH, dye concentration, amount of adsorbent, contact time and temperature on removal processing was investigated. Adsorption isothermal data could be interpreted by t...