Composite Failure Modes at High Cyclic Fatigue Life Evaluation
نویسندگان
چکیده
منابع مشابه
Fatigue Life Assessment for Composite Structure
This work presents some of the most recent advances in the technologies which could enable accurate assessment of useful life for composite aircraft fatigue-critical, flight-critical components and structure. Such technology advances include: (1) nondestructive subsurface measurement shift from just detection of defects to three-dimensional measurement of defect location and size; (2) material ...
متن کاملFatigue Damage and Lifetime of SiC/SiC Ceramic-Matrix Composite under Cyclic Loading at Elevated Temperatures
In this paper, the fatigue damage and lifetime of 2D SiC/SiC ceramic-matrix composites (CMCs) under cyclic fatigue loading at 750, 1000, 1100, 1200 and 1300 °C in air and in steam atmosphere have been investigated. The damage evolution versus applied cycles of 2D SiC/SiC composites were analyzed using fatigue hysteresis dissipated energy, fatigue hysteresis modulus, fatigue peak strain and inte...
متن کاملAn Investigation of the Fatigue Induced Failure Modes
It is proposed to use elastomeric composites as artificial joint bearing surfaces to increase their fluid film lubrication and therefore reduce the number of failures which have been attributed to wear mechanisms. The fluid generated between the surfaces supports part of the load and prevents direct contact of the bearing surfaces. However, permanent deformation and failure of model elastomeric...
متن کاملQuasistatic Deformation and Failure Modes of Composite Square Honeycombs
Carbon fibre epoxy matrix composite honeycombs have been fabricated by slotting, assembling and adhesively bonding composite laminate sheets with various fibre architectures. Their out-of-plane compressive and in-plane shear responses were measured as a function of relative density, ratio of the cell height to width and the number of cells in the specimen. The measurements indicate that the res...
متن کاملComparison of cyclic fatigue life of nickel-titanium files: an examination using high-speed camera
OBJECTIVES To determine the actual revolutions per minute (rpm) values and compare the cyclic fatigue life of Reciproc (RPC, VDW GmbH), WaveOne (WO, Dentsply Maillefer), and TF Adaptive (TFA, Axis/SybronEndo) nickel-titanium (NiTi) file systems using high-speed camera. MATERIALS AND METHODS Twenty RPC R25 (25/0.08), 20 WO Primary (25/0.08), and 20 TFA ML 1 (25/0.08) files were employed in the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Automotive and Mechanical Engineering
سال: 2020
ISSN: 2180-1606,2229-8649
DOI: 10.15282/ijame.17.3.2020.03.0607