Composites of High-Temperature Thermomechanical Pulps and Polylactic Acid
نویسندگان
چکیده
منابع مشابه
Thermomechanical Properties of Polylactic Acid-Graphene Composites: A State-of-the-Art Review for Biomedical Applications
Due to its biodegradable and bioabsorbable characteristics polylactic acid (PLA) has attracted considerable attention for numerous biomedical applications. Moreover, a number of tissue engineering problems for function restoration of impaired tissues have been addressed by using PLA and its copolymers due to their biocompatibility and distinctive mechanical properties. Recent studies on various...
متن کاملEffects of Biomass in Polyethylene or Polylactic Acid Composites
There is need for bioplastics to replace some of the total petroleum plastics used in the world, and help alleviate environmental pollution. Compounding bioplastics with Polyethylene (PE) or Polylactic acid (PLA) containing a dairy-based bioplastic resulted in composites with good mechanical properties. In this study, mass ratios of a dairy-protein-based material (DBP) ranging from 0, 5, 10 and...
متن کاملPolylactic acid composites incorporating casein functionalized cellulose nanowhiskers
BACKGROUND Polylactic acid (PLA) is considered to be a sustainable alternative to petroleum-based polymers for many applications. Using cellulose fiber to reinforce PLA is of great interest recently due to its complete biodegradability and potential improvement of the mechanical performance. However, the dispersion of hydrophilic cellulose fibers in the hydrophobic polymer matrix is usually poo...
متن کاملNew Polylactic Acid Composites Reinforced with Artichoke Fibers
In this work, artichoke fibers were used for the first time to prepare poly(lactic acid) (PLA)-based biocomposites. In particular, two PLA/artichoke composites with the same fiber loading (10% w/w) were prepared by the film-stacking method: the first one (UNID) reinforced with unidirectional long artichoke fibers, the second one (RANDOM) reinforced by randomly-oriented long artichoke fibers. Bo...
متن کاملCharacteristics of Peroxide Bleaching of Microwave-Heated Thermomechanical Pulps
A brightness of 76% (initially 57%) was reached with a charge of 4.5% hydrogen peroxide based on thermomechanical pulp in 10 min with microwave heating, compared to 45 min with water-bath heating. The maximum brightness attained with water-bath heating (78%) was nearly one point higher than that obtained with microwave heating, albeit after twice the time (120 min vs. 60 min). Under similar con...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BioResources
سال: 2015
ISSN: 1930-2126
DOI: 10.15376/biores.11.1.1125-1140