Compressibility of electrospun fiber mats

Compressibility of electrospun fiber mats

Compressive properties of electrospun fiber mats are reported for the first time. Mats of bisphenol-A polysulfone (PSU) and of poly(trimethyl hexamethylene terephthalamide) (PA 6(3)T) were electrospun and annealed at a range of temperatures spanning the glass transition temperature of each polymer. The data for applied stress versus mat solidity were found to be well-described by a power law of...

1 Compressibility of Electrospun Fiber

Compressive properties of electrospun fiber mats are reported for the first time. Mats of bisphenol-A polysulfone (PSU) and of poly(trimethyl hexamethylene terephthalamide) (PA 6(3)T) were electrospun and annealed at a range of temperatures spanning the glass transition temperature of each polymer. The data for applied stress versus mat solidity were found to be well-described by a power law of...

Physical-chemical properties of cross-linked chitosan electrospun fiber mats

Chitosan fiber mats were successfully processed by electrospinning. The as-spun fiber mats were neutralized with ethanol and cross-linked with glutaraldehyde. A decrease of the fiber average diameter from 243 ± 43 nm down to 215.53 nm was observed for the neutralized and cross-linking chitosan membrane. It was found that the processing conditions do not alter the initial deacetylation degree of...

Permeability of electrospun fiber mats under pressure driven flow

Hydraulic permeability of electrospun fiber mats under flow-induced compression has been modeled and verified experimentally. The permeation model accurately estimates the changes in solidity, and hence the permeability of the electrospun mats, over a range of pressure differentials. The model is based on Darcy’s law applied to a compressible, porous medium, using Happel’s equation for the perm...

1 Three - Dimensional Imaging of Electrospun Fiber Mats