Compressive Flow Stress-strain Behavior of Duplex Stainless Steels
نویسندگان
چکیده
منابع مشابه
Super Plasticity of /α Duplex Stainless Steels
In this paper the studies of the two-phase super Plasticity stainless steels is studied. The aim of this study obtained the suitable criteria to thermo-mechanical treatment condition for decrease the microstructure (grain size) and super plasticity property in two-phase stainless steels. Also here we want to show the appropriate ranges of temperature and strain rate used in the process super pl...
متن کاملSecondary Hardening Behavior in Super Duplex Stainless Steels during LCF in Dynamic Strain Ageing Regime
Cyclic deformation behaviors in five modified duplex and 350°C. The influence of temperature and ni phenomenon, in the stress response curve was focuse dynamic strain ageing by increasing the first hardeni Furthermore, an increase in nitrogen concentration in ageing temperature range. The occurrence of strai structures. The formation of irreversible dislocation s hardening in the stress respons...
متن کاملInfluence of Initial Microstructure on Hot Deformation Behavior of Duplex Stainless Steels
In this research the effect of initial microstructure on hot deformation behavior in terms of Ferrite-to-Austenite ratios is studied. Two types of stainless steels C1 and C2 were homogenizing heat-treated and deformed under hot compression examinations at temperatures 900ºC and 1100ºC at strain rate of 0.1s-1. The results showed that the flow stress levels of specimens are strongly r...
متن کاملEffect of Secondary Phase Precipitation on the Corrosion Behavior of Duplex Stainless Steels
Duplex stainless steels (DSSs) with austenitic and ferritic phases have been increasingly used for many industrial applications due to their good mechanical properties and corrosion resistance in acidic, caustic and marine environments. However, DSSs are susceptible to intergranular, pitting and stress corrosion in corrosive environments due to the formation of secondary phases. Such phases are...
متن کاملCorrosion performance of welds in duplex, superduplex and lean duplex stainless steels
To achieve good corrosion resistance in a weld is much more challenging than for plate or sheet material, which has undergone controlled rolling, heat treatment and pickling processes in the steel mill. The choice of weld procedure and parameters, filler metal and shielding gas all play important roles. For duplex and lean duplex grades it is essential to ensure that an adequate amount of auste...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1989
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.75.12_2202