Compton Suppressed Gamma Spectrometry for activation analysis of materials irradiated at JET

A Compton-Suppressed Phoswich Detector for Gamma Spectroscopy

A phoswich detector with two scintillation layers has been designed and assembled at Oregon State University. This detector is able to identify and reject Compton events and ultimately reduce the Compton continuum in gamma energy spectra. In this detector, CsI(Tl) crystal is used to primarily detect photoelectric events. The CsI(Tl) crystal is partially surrounded by a BGO crystal layer to capt...

Neutron activation and high resolution gamma spectrometry--activation analysis.

Compton scattering as a probe for materials investigation

This article investigates into the feasibility of using gamma radiation Compton backscatter spectra as a means of material characterization, with the view to developing a portable, hand held probe for investigative purposes such as searching for illicit substances hidden in wall or car door cavities.

Producing 65Zn and 60Co gamma sources for energy and efficiency calibration of gamma spectrometry systems

Precise calibration of energy and efficiency of gamma spectrometry systems for different geometries is very important. In most cases, preparation of these sources for educational and research centers  is very difficult due to high costs and lack of access to the reactor. The purpose of this paper is to explain the procedure for production of calibration sources 65Zn and 60Co using instrumental ...

Microbeam analysis of irradiated materials: practical aspects.

Among the microanalytical techniques, electron probe microanalysis (EPMA) is one of the most powerful. Its performances can be used to provide an accurate characterization. In the present article the differences between the EPMA of highly irradiated materials and standard EPMA are highlighted. It focuses on the shielded EPMA specificities. Then, the article presents the difficulties encountered...