Computational Modeling of Damage Growth in Composite Laminates

Damage Assessment of Drilled Hybrid Composite Laminates

Hole drilling operations are common in fibre reinforced plastics FRP’s to facilitate fastener assembly to other parts in more complex structures. As these materials are non-homogeneous, drilling causes some damages, like delamination, for example. Delamination can be reduced by a careful selection of drilling parameters, drill material and drill bit geometry. In this work two types of laminates...

Modeling of Hygrothermal Damage of Composite Materials

Composite materials have been used extensively in various applications, such as mechanical engineering, aerospace engineering, and aviation thanks to their interesting mechanical properties. However, a substantial drawback in the use of such composite materials is that they absorb a significant amount of moisture when exposed to severe hygrothermal conditions. This factor dramatically affects t...

Modelling low velocity impact induced damage in composite laminates

The paper presents recent progress on modelling low velocity impact induced damage in fibre reinforced composite laminates. It is important to understand the mechanisms of barely visible impact damage (BVID) and how it affects structural performance. To reduce labour intensive testing, the development of finite element (FE) techniques for simulating impact damage becomes essential and recent ef...

Vibration Monitoring of Composite Laminates with Delamination Damage

A Shell/3d Modeling Technique for Delaminations in Composite Laminates

A shell/3D modeling technique was developed for which a local solid finite element model is used only in the immediate vicinity of the delamination front. The goal was to combine the accuracy of the full three-dimensional solution with the computational efficiency of a plate or shell finite element model. Multi-point constraints provide a kinematically compatible interface between the local 3D ...