Computer Simulation of Ultrasonic Evaluation.
نویسندگان
چکیده
منابع مشابه
Computer Modeling and Simulation of Ultrasonic System for Material Characterization
In this paper the system for simulation, measurement and processing in graphical user interface implementation is presented. The received signal from the simulation is compared to that of an actual measurement in the time domain. The comparison of simulated, experimental data clearly shows that acoustic wave propagation can be modeled. The feasibility has been demonstrated in an ultrasound tran...
متن کاملSimulation of Ultrasonic and Electromagnetic Nondestructive Evaluation of Corrosion
The influence of corrosion on ultrasonic and electromagnetic nondestructive evaluation results has been simulated for 2-layer aluminum aircraft fuselage. Simulations have been performed with respect to ultrasonic time-of-flight measurements aiming on the detection of corrosion at the backwall of the first aluminum layer. Calculations of the eddy current probe response have been performed, where...
متن کاملComputer Simulation of Ammonia Cold Shot Converter
A mathematical model is developed and tested with plant data for the ammonia cold shot converter of Razi Petrochemical Complex. The model is based on a material and energy balance in a differential element of beds and is subjected to the assumptions of uniform distribution of temperature and composition through a general cross section and negligible mass and heat transfer in axial direction. Th...
متن کاملComparative study of computer simulation softwares
One of the methods for analyzing systems is simulation. Network simulation is a technique that models the behavior of the network by performing transaction calculations between different network entities and using mathematical formulas and taking observations from network products. A network simulator is a piece of software or hardware that predicts the behavior of a computer network without a ...
متن کاملComputer Simulation of Equidxed Eutectic Solidifiction of Metals
In the present work, the solidification process was simulated in both macroscopic and microscopic scales. Two-dimensional heat transfer equation for conduction was applied for macroscopic modeling using enthalpy formulation and finite element method. In order to decrease execution time and/or memory capacity in finite analysis, skyline mathematical technique was adapted. The microenthalpy metho...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Welding Society
سال: 1991
ISSN: 0021-4787,1883-7204
DOI: 10.2207/qjjws1943.60.581