Concrete manufacture with un‐graded recycled aggregates

Performance of High-strength Concrete Made with Recycled Ceramic Aggregates

Recent scientific concerns to achieve sustainability in construction have suggested the implementation of using recycled aggregate in concrete because it has the potential to reduce the demand for extraction of natural raw materials and decrease the volume of wastes landfilled. In this respect, this study aims to investigate the suitability of using ceramic tile (CT) and ceramic sanitary (CS) w...

Low Cycle Fatigue Behavior of Concrete with Recycled Concrete Aggregates

A comparison of concrete containing recycled concrete coarse aggregates and natural coarse aggregates subjected to high strain, low cycle compressive fatigue is presented. Using a strain based feedback control loop, concrete cylinders are compressed at 15µε/s to a specified strain then unloaded to zero stress for 10 cycles. After cycling, all samples are loaded to a strain of 0.008. Direct conc...

Pre-Saturation Technique of the Recycled Aggregates: Solution to the Water Absorption Drawback in the Recycled Concrete Manufacture †

The replacement of natural aggregates by recycled aggregates in the concrete manufacturing has been spreading worldwide as a recycling method to counteract the large amount of construction and demolition waste. Although legislation in this field is still not well developed, many investigations demonstrate the possibilities of success of this trend given that concrete with satisfactory mechanica...

Effects of Recycled Concrete Aggregates on Properties of Asphalt Concrete

Life Cycle Assessment of Sustainable Concrete Made With Recycled Aggregates

The results of an environmental study on concrete manufacture that follows the standard protocol of life cycle assessment are shown in this document. The study has been done for seven types of concrete: one conventional and six containing cement kiln dust (10%), marble sludge (10%) and demolition waste (10%, 80% and 100%) respectively, in partial or total substitution of natural aggregate. Six ...