Condensation of R-134a on horizontal integral-fin titanium tubes
نویسندگان
چکیده
منابع مشابه
Flow condensation in horizontal tubes
Article history: Received 30 April 2013 Received in revised form 20 June 2013 Accepted 20 June 2013 Available online 27 July 2013
متن کاملThe Combined Effect of Vapour Velocity and Condensate Inundation During Condensation on Integral-Fin Tubes: A Theoretical Analysis
This work presents procedures to compute the heat transfer coefficient when downwards flowing pure vapours (or azeotropic mixtures) condense on horizontal integral-fin tubes. At first, single tubes are considered, and the suggested procedure takes shear, gravity and surface tension force into account. The method is compared with a vast data bank demostrating a sound concordance. The second part...
متن کاملExperimental Investigation of the Condensation Heat Transfer Coefficient of R134a inside Horizontal Smooth and Micro-Fin Tubes
The condensation heat transfer coefficient of R134a was experimentally studied inside two smooth and four micro-fin tubes. The working conditions and structural parameters of the test tubes were selected as the influencing factors, and the experiment was conducted under mass velocities of 400–1100 kg·m−2·s−1, condensation temperatures of 35–45 ◦C and water-testing Reynolds numbers of 8000–22,00...
متن کاملExperimental Study On R-134A Condensation Heat Transfer Characteristics In Plate And Shell Heat Exchangers
In this study, condensation heat transfer experiments were conducted with two types of plate and shell heat exchangers (P&SHE) using R-134A. An experimental refrigerant loop has been established to measure the condensation heat transfer coefficient of R-134A in a vertical P&SHE. Two vertical counter flow channels were formed in the P&SHE by stacking three plates of geometry with a corrugated tr...
متن کاملNew High Efficiency R-134a Compressor
Over the last thirty years, few changes have taken place in reciprocating refrigeration and freezer hermetic· compressors. Of course there have been design improvements and many new applications, but the basics have stayed the same. DOE requirements have brought new energy standards for 1993 and, with most of that work behind them, manufacturers of white goods are concentrating on alternate ref...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Thermal Engineering
سال: 2010
ISSN: 1359-4311
DOI: 10.1016/j.applthermaleng.2009.09.007