Conjugate simulation of solar honeycomb receiver for high temperature heat absorption at constant incident heat flux
نویسندگان
چکیده
منابع مشابه
A comparison of turbulent thermal convection between conditions of constant temperature and constant heat flux
We numerically investigate turbulent thermal convection driven by a horizontal surface of constant heat flux and compare the results with those of constant temperature. Below Ra≈ 10, where Ra is the Rayleigh number, when the flow is smooth and regular, the heat transport in the two cases is essentially the same. For Ra> 10 the heat transport for imposed heat flux is smaller than that for consta...
متن کاملIn Situ High Temperature Heat Flux Sensor Calibration
Recent advances in heat flux measurement have resulted in the development of a robust thermopile heat flux sensor intended for use in extreme thermal environments. The High Temperature Heat Flux Sensor (HTHFS) is capable of simultaneously measuring thermopile surface temperature and heat flux at sensor temperatures up to 1000 ◦C. The need for high temperature heat flux calibration of the HTHFS ...
متن کاملEffect of Opening Ratio and Operating Temperature on Heat Losses for Cavity Receiver of Solar Concentrator
In this paper effect of opening ratio and operating temperature on convective and radiative losses from cavity receiver of solar concentrators are presented. Convective and radiative
متن کاملCalibration of High Heat Flux Sensors at NIST
An ongoing program at the National Institute of Standards and Technology (NIST) is aimed at improving and standardizing heat-flux sensor calibration methods. The current calibration needs of U.S. science and industry exceed the current NIST capability of 40 kW/m2 irradiance. In achieving this goal, as well as meeting lower-level non-radiative heat flux calibration needs of science and industry,...
متن کاملNumerical Study of Spatial Surface Temperature and Nucleation Site Density At High Heat Flux Pool Boiling
A numerical study of nucleation site density was included into the macrolayer model of Maruyama et al.. The results indicate that nucleate boiling curve and critical heat flux point move to the lower superheat region with increasing surface roughness, which is in a good agreement with Bereson ’s experiment. Furthermore, a three dimensional numerical method using finite control volume method and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Thermal Science and Technology
سال: 2020
ISSN: 1880-5566
DOI: 10.1299/jtst.2020jtst0018