Consideration on a Laser Welding Condition Range under which Fatigue Strength is Stabilized in Lap Joints of Aluminum Alloys
نویسندگان
چکیده
منابع مشابه
Fatigue behaviour of composite adhesive lap joints
This paper is concerned with a fatigue study of composite adhesive lap joints produced from a bi-directional woven E-glass fibres and polypropylene. The adhesive used was a Bostik 7452 (Rubber & Plastics Grade) ethyl cyanoacrylate type. The effects of layer orientation, lap joint length and water immersion on the fatigue behaviour were studied. The specimens were immersed in water during period...
متن کاملEffect of laser irradiation conditions on the laser welding strength of cobalt-chromium and gold alloys.
Using tensile tests, this study investigated differences in the welding strength of casts of cobalt-chromium and gold alloys resulting from changes in the voltage and pulse duration in order to clarify the optimum conditions of laser irradiation for achieving favorable welding strength. Laser irradiation was performed at voltages of 150 V and 170 V with pulse durations of 4, 8, and 12 ms. For c...
متن کاملfeasibility study on aluminum alloys and a441 aisi steel joints by friction stir welding
in this paper, welding feasibility between aa1100, aa5050 and aa6082 aluminum alloys and a441 aisi steel by friction stir welding has been studied. mathematical analysis of the heat generation during process showed that the maximum temperature produced in aa6082 aluminum alloy and a441 aisi joint but heat distribution in aa1100 aluminum alloy was higher than the other alloys. the investigation ...
متن کاملLaser Welding of Magnesium Alloys
Aiming at establishing a reliable welding technique for magnesium alloys, the laser weldability of different types of magnesium alloys has been investigated using a high-brightness disc laser. It was found that high quality joints could be fabricated in the case of wrought type alloys when a certain defocusing level was optimized for the employed high-brightness laser beam of the newly develope...
متن کاملReal-time monitoring of laser welding of galvanized high strength steel in lap joint configuration
Two different cases regarding the zinc coating at the lap joint faying surface are selected for studying the influence of zinc vapor on the keyhole dynamics of the weld pool and the final welding quality. One case has the zinc coating fully removed at the faying surface; while the other case retains the zinc coating on the faying surface. It is found that removal of the zinc coating at the fayi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 2004
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.70.1491