Consolidation, Microstructure and Crystallography of Dense NaNbO<sub>3</sub> Ceramics with Ultra-Fine Grain Size
نویسندگان
چکیده
منابع مشابه
Microstructure Characteristics of Ultra-fine ZrO2-Y203 Ceramic Powders*
Yttria-doped zirconia powders" with an extremely small crystallite size (8 nm) and a narrow size distribution have been prepared by gel precipitation methods. Precipitation of an alkoxide solution in water ("alkoxide" synthesis) results in weaker agglomerates when compared with a precipitation of a metal chloride solution in ammonia ("chloride" synthesis). Both types of agglomerate are fracture...
متن کاملUnfolding grain size effects in barium titanate ferroelectric ceramics
Grain size effects on the physical properties of polycrystalline ferroelectrics have been extensively studied for decades; however there are still major controversies regarding the dependence of the piezoelectric and ferroelectric properties on the grain size. Dense BaTiO3 ceramics with different grain sizes were fabricated by either conventional sintering or spark plasma sintering using micro-...
متن کاملMicrostructure of spark plasma sintered TiB2 and TiB2–AlN ceramics
In this research study, the effects of aluminum nitride (AlN) additive on the densification behavior and microstructure development of titanium diboride (TiB2) based ceramic matrix composite were investigated. In this way, a monolithic TiB2 ceramic and a TiB2–5 wt% AlN ultrahigh temperature ceramic composite were fabricated by spark plasma sintering (SPS) proces...
متن کاملGrain size effects in the forming of ultra-thin sheets
Introduction The number of micro scale applications of metals is growing rapidly. Progressive miniaturization has become a decisive characteristic of developments in electronic devices (Figure 1) or electronically controlled mechanical systems. Along with the miniaturization so-called size effects occur in sheet metal manufacturing processes. These effects are assumed to be caused by changes in...
متن کاملMicrostructure and magnetic properties of perpendicular media with reduced grain size
A new approach to control the grain size of Co alloy oxide perpendicular media by means of Ar-ion etching is presented. Ar plasma was applied to the surface of a continuous Ru1 layer, on top of which a granular Ru2+SiO2 layer was subsequently deposited. It was found that etching time and high Ar-ion energy have a significant effect on the surface roughness of the seedlayer, which in turn have a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2006
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.114.995